Section I
نویسندگان
چکیده
منابع مشابه
ANALYTICAL STUDY OF STEEL I-BEAM WITH STEPPED FLANGES
This paper presents a parametric study of steel I- beam with stepped flanges by using finite element analysis. Stepped flange beam is used in structures to decrease the negative bending moments near interior supports that causes failure due to buckling. Steps in the cross section can be achieved by adding cover plates to the beam flanges, changing the size of the hot rolled section, or changing...
متن کاملThe Effect of the Slot Length on Beam Vertical Shear in I-Beams with Moment Connections
This paper evaluates the effect of slot existence with limited length between flanges and web junction of I-shaped beams at the region of moment connections on vertical force and shear stress distribution in beam flanges and web at connection section in comparison with classical theory of stress distribution. The main purpose of this research is to evaluate the efficiency of the slot in connect...
متن کاملFlexural-torsional stability of sandwich tapered I-beams with a functionally graded porous core
The present research deals with the flexural-torsional buckling analysis of sandwich web and/or flanges tapered doubly-symmetric I-beam. All section walls are composed of two metal face layers and a functionally graded (FG) porous core. It is assumed that the material properties of the porous core vary gradually in the longitudinal direction according to the simple power-law function considerin...
متن کاملEffective factors to select cesarean-section
Background: A significant increase in cesarean section in worldwide is known as one of the health system problems. The WHO has estimated that cesarean section in recent years has been 10% in all countries. Despite the increasing popularity of cesarean section, the literature lacks insights about factors affecting the selection of this delivery method. In this vein, this study investigates the ...
متن کاملCuO/water Nanofluid Convective Heat Transfer Through Square Duct Under Uniform Heat Flux
Sometimes the need for non-circular ducts arises in many heat transfer applications because of lower pressure drop of non-circular cross section such as square duct compared to circular tube, particularly in compact heat. But square cross section has poor heat transfer performance and it is expected that using a nanofluid as a new heat transfer media may improve the heat transfer performance of...
متن کاملExplicit Stiffness of Tapered and Monosymmetric i Beam-Columns
A formulation for finite element analysis of tapered and monosymmetric I shaped beam-columns is presented. This is a general way to analyze these types of complex elements. Based upon the formulation, member stiffness matrix is obtained explicitly. The element considered has seven nodal degrees of freedom. In addition, the related stability matrix is found. Numerical studies of the aforementio...
متن کامل