Performance of ultrafiltration membranes in ethanol–water solutions: effect of membrane conditioning
نویسندگان
چکیده
Several commercial polymeric ultrafiltration membranes were screened for their performance with aqueous ethanol solutions. The method of conditioning the membrane has a major effect on solvent flux, membrane integrity and their pressure ratings. Gradual solvent exchange with successively higher concentrations increased in small doses appears to work best with completely miscible solvents such as those studied here (ethanol–water mixtures). Rapid solvent exchange between water and high concentrations of alcohol disrupts the polymer matrix in many cases. The Darcy model was used to correlate the data and it indicated that viscosity differences of the ethanol solutions could account for part of the variations in solvent flux with some membranes. Exposure to organic solvents significantly reduces the pressure rating of the membranes. Several membranes that provided acceptable rejection of ethanol-soluble proteins at low pressures (138 kPa, 20 psi) lose its properties at higher pressures (413 kPa, 60 psi) if conditioned incorrectly, and vice versa. © 2002 Elsevier Science B.V. All rights reserved.
منابع مشابه
Correlated Effect of Air Gap and PVP Concentration on the Structure and Performance of PVDF Ultrafiltration Hollow Fiber Membrane
Polyvinylidene fluoride/polyvinylpyrrolidone (PVDF/PVP) hollow fiber membranes were fabricated by dry-jet wet-spinning process. The correlated effects of the air gap length and PVP concentration ((1) the air gap length effect at the low and high PVP concentration in the dope solutions, as well as (2) the effect of the PVP concentration at the same air gap length) on the cross-section structure ...
متن کاملPreparation and characterization of MWCNT-COOH/PVC ultrafiltration membranes to use in water treatment
Polyvinyl chloride (PVC) membranes containing pristine and modified multiwall carbon nanotube (MWCNT) were prepared and characterized. MWCNT was modified in order to achieve well-dispersion within the membranes. The results of FTIR analysis revealed that MWCNT was successfully carboxylated. The FESEM images indicated that the number of pores on the surface of membranes increased at the presence...
متن کاملPreparation and Characterization of CA−PEG−TiO2 Membranes: Effect of PEG and TiO2 on Morphology, Flux and Fouling Performance
Modified cellulose acetate (CA) membranes were prepared by dissolving the polymers in a mixture of acetone (AC) and N, N dimethylacetamide (DMAc) (70:30) solvent and deionized (DI) water was used in the coagulation bath. The introduction of polyethylene glycol (PEG) additive and TiO2 nanoparticles (NPs) into the casting solution has changed the structures of the resulting membranes during the p...
متن کاملNanocomposite Ultrafiltration Membranes Incorporated with Zeolite and Carbon Nanotubes for Enhanced Water Separation
The objective of this work is to develop a new class of nanocomposite ultrafiltration (UF) membranes with excellent solute rejection rate and superior water flux using zeolitic imidazolate framework-8 (ZIF-8) and multi-walled carbon nanotubes (MWCNTs). The effect of ZIF-8 and MWCNTs loadings on the properties of polyvinyldifluoride (PVDF)-based membrane were investigated by introducing respecti...
متن کاملFabrication of Nanofiltration Membrane from Polysulfone Ultrafiltration Membrane Via Photo olymerization
UV-induced grafting technique was used as a flexible method for surface modification of Polysulfone (PSf) ultrafiltration (UF) membranes in order to prepare hydrophilic nanofiltration (NF) membranes. Flat sheet Polysulfone (PSf) ultrafiltration membranes were prepared via phase inversion method. N-methylene-2-pyrrolidone (NMP) and polyethylene glycol (PEG) of three different molecular weights (...
متن کامل