HEAT CAPACITY OF HAFNIUM MONONITRIDE FROM TEMPERATURES OF 5 TO 350 K An estimation procedure
نویسندگان
چکیده
Measurements of the heat capacity by quasi-adiabatic, intermittent energy increments from 5 to 350 K show small high heat-capacity anomalies near 7 and 10 K which are attributed to superconducting transitions seen by magnetic measurements on the same carefully synthesized and well-characterized sample of (Hf0.934Zr0.057)(N0.97). Although no previous heat capacity measurements over the cryogenic region are known, the estimated 298.15 K standard entropy values (S/R) vary in the literature from about 200 per cent higher to 5 per cent lower than our measured value of (5.28±0.01)R when the formula is represented as above. A simple scheme to represent and predict values based on both molar volumes and atomic masses for related materials is presented which seems more reliable on a limited sample than do others despite the intrusion of lanthanide contraction.
منابع مشابه
Thermodynamic and Kinetic Studies for a Refractory Materials Program
Work during 1963 is reported and the work from mid-1960 reviewed on a comprehensive program of thermodynamic and kinetic studies necessary to the theoretical consideration to temperatures of 3000K of the reactions of the zirconium and hafnium carbides and borides with oxygenor halogen-containing atmospheres. ; • Work presented includes: preparation of borides and carbides; low ', temperature he...
متن کاملLow Temperature Heat Capacity and Thermodynamic Properties of Zinc Ferrite*
The heat capacity of zinc ferrite (ZnFe,O,) has been determined over the range 5 to 350°K. Molal values of C~,S’, and HO-H,O computed from the thermal data are 32,99&t-0.03 cal/deg., 36.01 f0.03 cal/deg., and 18,00&0.02 Cal, respectively, at 298,lS”K. A co-operative thermal anomaly associated with antiferromagnetic ordering occurs at 9.5” and extends toward higher temperatures probably as a con...
متن کاملA TRANSIENT TWO-DIMENTIONAL INVERSE ESTIMATION OF THE METAL-MOLD HEAT TRANSFER COEFFICIENT DURING SQUEEZE CASTING of AL-4.5WT%CU
In this paper, a transient, two-dimensional and nonlinear inverse heat conduction problem in solidification process is considered. Genetic algorithm is applied for the identification of the interfacial heat transfer coefficients during squeeze casting of commercial aluminum alloy (Al-4.5wt%Cu) by assuming a priori information regarding the functional form of the unknown heat transfer coefficien...
متن کاملCompressed Liquid Densities for Binary Mixtures at Temperatures from 280- 440K at Pressures up to 200 MPa
A method for predicting liquid densities of binary mixtures from heat of vaporization and liquid densityat boiling point temperature (ΔHvap and n b ρ ) as scaling constants, is presented. B2(T) follows a promisingcorresponding-states principle. Calculation of α(T) and b(T), the two other temperature-dependentconstants of the equation of state, are made possible by scaling. As a result ΔHvap and...
متن کاملThe Effect of Microstructure on Estimation of the Fracture Toughness (KIC) Rotor Steel Using Charpy Absorbed Energy (CVN)
The proportional relationships between the Charpy absorbed energy (CVN) and the KIC values have been established for a wide variety of steels. Several formulae have been proposed that predict KIC from CVN. The purpose of this study is to investigate, by means of compact testing fracture toughness specimens, the effective role of microstructure for estimation of the fractur...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2002