CoMP in the Sky: UAV Placement and Movement Optimization for Multi-User Communications
نویسندگان
چکیده
Driven by the recent advancement in unmanned aerial vehicle (UAV) technology, this paper proposes a new wireless network architecture of coordinate multipoint (CoMP) in the sky to harness both the benefits of interference mitigation via CoMP and high mobility of UAVs. Specifically, we consider uplink communications in a multi-UAV enabled multi-user system, where each UAV forwards its received signals from all ground users to a central processor (CP) for joint decoding. Moreover, we consider the case where the users may move on the ground, thus the UAVs need to adjust their locations in accordance with the user locations over time to maximize the network throughput. Utilizing random matrix theory, we first characterize in closed-form a set of approximated upper and lower bounds of the user’s achievable rate in each time episode under a realistic line-of-sight (LoS) channel model with random phase, which are shown very tight both analytically and numerically. UAV placement and movement over different episodes are then optimized based on the derived bounds to maximize the minimum of user average achievable rates over all episodes for both cases of full information (of current and future episodes) and current information on the user’s movement. Interestingly, it is shown that the optimized location of each UAV at any particular episode is the weighted average of the ground user locations at the current episode as well as its own location at the previous and/or next episode. Finally, simulation results are provided to validate and compare the performance of the proposed UAV placement and movement designs under different practical application scenarios. Index Terms UAV communication, placement and movement optimization, coordinated multipoint (CoMP), beamforming, rate maximization. The authors are with the Department of Electrical and Computer Engineering, National University of Singapore, Singapore (e-mails: {eleliu,elezhsh,elezhang}@nus.edu.sg).
منابع مشابه
Optimal Placement and Sizing of Distributed Generation Via an Improved Nondominated Sorting Genetic Algorithm II
The use of distributed generation units in distribution networks has attracted the attention of network managers due to its great benefits. In this research, the location and determination of the capacity of distributed generation (DG) units for different purposes has been studied simultaneously. The multi-objective functions in the optimization model are reducing system line losses; reducing v...
متن کاملThroughput Maximization for Multi-Slot Data Transmission via Two-Hop DF SWIPT-Based UAV System
In this paper, an unmanned aerial vehicle (UAV) assisted cooperative communication system is studied, wherein a source transmits information to the destination through an energy harvesting decode-and-forward UAV. It is assumed that the UAV can freely move in between the source-destination pair to set up line of sight communications with the both nodes. Since the battery of the UAV may be limite...
متن کاملDiscrete Multi Objective Particle Swarm Optimization Algorithm for FPGA Placement (RESEARCH NOTE)
Placement process is one of the vital stages in physical design. In this stage, modules and elements of circuit are placed in distinct locations according to optimization basis. So that, each placement process tries to influence on one or more optimization factor. In the other hand, it can be told unequivocally that FPGA is one of the most important and applicable devices in our electronic worl...
متن کاملMulti-objective Based Optimization Using Tap Setting Transformer, DG and Capacitor Placement in Distribution Networks
In this article, a multi-objective function for placement of Distributed Generation (DG) and capacitors with thetap setting of Under Load Tap Changer (ULTC) Transformer is introduced. Most of the recent articles have paidless attention to DG, capacitor placement and ULTC effects in the distribution network simultaneously. Insimulations, a comparison between different modes was carried out with,...
متن کاملApplication of Multi Objective HFAPSO algorithm for Simultaneous Placement of DG, Capacitor and Protective Device in Radial Distribution Network
In this paper, simultaneous placement of distributed generation, capacitor bank and protective devices are utilized to improve the efficiency of the distribution network. The objectives of the problem are reduction of active and reactive power losses, improvement of voltage profile and reliability indices and increasing distribution companies’ profit. The combination of firefly algorithm, parti...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- CoRR
دوره abs/1802.10371 شماره
صفحات -
تاریخ انتشار 2018