DENTAL CASTiNG OF TITANIUM

نویسندگان

  • Sadami TSUTSUMI
  • Masatoshi TAKEUCHI
چکیده

and porcelain-fused-to-metal restorations instead of gold or silver alloys. This tendency seems to be the same a]1 over the world, However, the expanded use of nickel-containing base metal alloys in dentistry has raised questions concerning their biological s fety, namely, carcinogenic and sensitivity risks.i) On the other hand, since pure titanium or titanium-based alloys have excellent biocompatibility, they have been applied as dental implants and bone screws or artificial joints in the orthopedic field. Titanium is considered to have following advantages over conventional dental casting alloys: (1) the specific gravity o'f titanium is about a half of nickelor cobalt-based alloys, (2) the corrosion or tarnish resistance of titanium is excellent, (3) the mechanical properties of pure titanium are nearly equal to those ofdental gold alloys, (4) although the price of titanium is about the same or a little higher than that of cobalt or

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Casting of Titanium Alloys for Dental Applications

In dentistry, gold-based noble metal alloys have traditionally been cast into various types of dental prostheses, such as partial dentures, crowns, and bridges. More recently, less expensive dental alloys with base-metal elements, such as Co-Cr and Ni-Cr, have been used. Titanium is considered to be an attractive alternative to these traditional dental alloys because of its remarkable lack of t...

متن کامل

Dental Titanium Casting Researches in China

Titanium is an ideal material for use in prosthodontics because of its biocompatibility, corrosion resistance, and mechanical strength combined with its lightweight. Recently the use of titanium and titanium alloys for fixed restorations has increased substantially, mainly due to the improvement of techniques for the casting titanium and its alloys. This article reviewed the studies on titanium...

متن کامل

Effect of magnesia investments in the dental casting of pure titanium or titanium alloys.

For past several years, precious alloys have been gradually replaced by non-precious ones in the dental casting field because of the rising price of dental alloys. In Japan during the past ten years, nickel-chromium alloys have been used extensively for crown or bridge and porcelain-fused-to-metal restorations instead of gold or silver alloys. This tendency seems to be the same all over the wor...

متن کامل

An experimental model for the assessment of titanium denture casting techniques.

In order to establish the most suitable technique for the construction of cast titanium denture frames, an experimental model was developed for the quantification of casting success. A relatively large wax pattern (36 x 29 x 0.9 mm) was prepared from a grid sheet used for the construction of cast cobalt chromium partial denture frames. The pattern consisted of 100 circles and the number of comp...

متن کامل

Dimensional accuracy and surface property of titanium casting using gypsum-bonded alumina investment.

The aim of the present study was to evaluate the dimensional accuracy and surface property of titanium casting obtained using a gypsum-bonded alumina investment. The experimental gypsum-bonded alumina investment with 20 mass% gypsum content mixed with 2 mass% potassium sulfate was used for five cp titanium castings and three Cu-Zn alloy castings. The accuracy, surface roughness (Ra), and reacti...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017