Thermally activated solvent bonding of polymers
نویسنده
چکیده
We present a thermally activated solvent bonding technique for the formation of embedded microstructures in polymer. It is based on the temperature dependent solubility of polymer in a liquid that is not a solvent at room temperature. With thermal activation, the liquid is transformed into a solvent of the polymer, creating a bonding capability through segmental or chain interdiffusion at the bonding interface. The technique has advantages over the more commonly used thermal bonding due to its much lower operation temperature (30 C lower than the material’s Tg), lower load, as well as shorter time. Lap shear test indicated bonding shear strength of up to 2.9 MPa. Leak test based on the bubble emission technique showed that the bonded microfluidic device can withstand at least six bars (87 psi) of internal pressure (gauge) in the microchannel. This technique can be applied to other systems of polymer and solvent.
منابع مشابه
Preparation and Properties of Thermally Stable Polyureas Containing Ether and Ketone Units
The main objective of this search was to prepare novel soluble polyureas with improved thermal stability. Accordingly, a new types of polyureas was prepared through the polycondensation reaction of a prepared diamine containing ether, keto, and naphthyl groups with 4,4’-diphenylmethan diisocyanate (MDI), toluene-2,4-diisocyanate (TDI), and isophorone diisocyanate (IPDI) in N-methyl-2-pyrrol...
متن کاملFabrication and Properties of Rapid Thermally Processed Carbon Nanofibers
The fabrication and properties of carbon nanofibers are interesting because of the fiber’s expected conductivity properties. If we can successfully control the fabrication and manipulation of carbon nanofibers we should be able to build nanoscale electronics. In this attempt, we have been able to successfully control some of the properties for the fabrication of nanofibers. Carbon nanofibers we...
متن کاملInduced Phase Separation
Guide regeneration techniques have been recently used to heal soft and hard tissue defects. In this approach, scaffolding plays an important role. Hydroxypatite (HA) resembles the natural bone mineral and has shown good bone bonding properties. In this work, porous polyurethanes have been prepared by a thermally induced phase separation technique. Freeze drying of the separated polymer/solvent ...
متن کاملPhysical gelation of polar aprotic solvents induced by hydrogen bonding modulation of polymeric molecules.
Poly(aryl ether amide) containing o-nitroanilide forms a physical gel in polar aprotic solvents by solvent-induced change of hydrogen bonding modes, in which hydrogen bonding acceptor solvent molecules break intramolecular hydrogen bonding of o-nitroanilide and induce intermolecular hydrogen bonding.
متن کاملSynthesis of Polyaniline/Polyamide composites as membrane and investigation of its properties
Practical applications of conducting polymers such as polyaniline as membranes are particulary limitedbecause of their poor mechanical properties. However by mixing polyaniline with some conventional insulatingpolymers such as nylon and preparation composite films through solvent casting or blending, it seems to be asuitable way in order to increase the mechanical properties of the conducting p...
متن کامل