Methodology for selection of samples from borehole probe for technological characterization of iron ore
نویسنده
چکیده
The risks in the evaluation of mining projects are directly related to the probability of errors in the estimates, and, as the estimates are based on sampling results, this activity must be performed in a careful and planned way, to prevent surprises at the beginning of operation. To validate the representativeness of the borehole samples selected for the mineral processing studies, the geological resources evaluation team proposed a methodology based on the utilization of statistical analyses that, beyond considering the spatial distribution of the samples in the deposit, also assessed if they are representative of the populations under investigation. With this data, the geologist is able to make a fast analysis of the sampling’s representativeness.
منابع مشابه
Determination of Rare Earth Elements in Products of Chadormalu Iron Ore Concentrator Plant (Iran) from Beneficiation Point of View
Different samples have been prepared from different products in Chadormalu iron ore concentrator plant: Low intensity magnetite separators concentrate (magnetite concentrate), reverse flotation tail (final hematite concentrate), flotation concentrate (apatite concentrate), final tail (L.I.M.S. tail + reverse flotation concentrate+ apatite flotation tail). The samples were used for rare eart...
متن کاملCharacterization of Sangan low-grade iron ore and its processing by dry low-intensity magnetic separation
In Sangan iron mine nearly two million tons of low-grade iron ore has been extracted and deposited in the mining site and currently no action is made on them. On the other hand, the mining site is located in the semi-arid region and wet processing has been restricted due to water shortage. In this research, the upgradation of Sangan low-grade iron ore from mine B has been performed by dry low-i...
متن کاملGamma Spectrometric Analysis of Iron Ore Samples of Arak, Iran
Introduction Iron ore is one of the most important natural raw materials that is widely used for manufacturing iron and steel. This type of ore contains various amounts of radionuclides; thus, exposing workers handling their extraction, transportation, and processing to radiation. Materials and Methods In this study, 12 ore samples (each mass weighing about 2 kg) were collected from the iron or...
متن کاملAnt colony algorithm as a high-performance method in resource estimation using LVA field; A case study: Choghart Iron ore deposit
Kriging is an advanced geostatistical procedure that generates an estimated surface or 3D model from a scattered set of points. This method can be used for estimating resources using a grid of sampled boreholes. However, conventional ordinary kriging (OK) is unable to take locally varying anisotropy (LVA) into account. A numerical approach has been presented that generates an LVA field by calcu...
متن کاملComparative Cyanide and Thiourea Extraction of Gold Based on Characterization Studies (TECHNICAL NOTE)
This study involved preliminary laboratory test work to identify the relative leaching response to cyanidation and thiourea leaching of an oxidized low grade gold ore based on characterization studies. Huge reserves of gold deposits have been reported from different parts of Iran, especially at Neishaboor area with gold grade of approx 4 ppm. For the mineralogical composition, the nature of the...
متن کامل