Reactive Power Considerations in Linear ATC Computation
نویسندگان
چکیده
This paper presents some initial concepts on including reactive power in linear methods for computing Available Transfer Capability (ATC). It proposes a new approach that first determines the reactive power flows using the exact circle equation for the transmission line complex flow, and then determines ATC using active power distribution factors. The ideas are demonstrated on 3-bus and 7-bus systems, and the results are discussed and compared with those obtained without reactive power considerations, and full nonlinear solutions
منابع مشابه
A Fast Calculation Method for Analyzing the Effect of Wind Generation on ATC
Wind energy penetration in power system has been increased very fast and large amount of capitals invested for wind farms all around the world. Meanwhile, in power systems with wind turbine generators (WTGs), the value of Available transfer capability (ATC) is influenced by the probabilistic nature of the wind power. The Mont Carlo Simulation (MCS) is the most common method to model the uncerta...
متن کاملFast Determination of Simultaneous Available Transfer Capability (ATC)
This paper proposes a novel fast computational method to determine the simultaneous power available transfer capability (ATC) in a power system. This method consists of a fast estimation algorithm and a constrained power flow iteration. The ATC limiting factors considered in the method are: line thermal limits, bus voltage limits, and generator reactive power limits. When combined with the firs...
متن کاملTransmission Line Loadability Improvement Using Facts Device
With the recent trends towards deregulating power systems around the world, transfer capability computation emerges as the key issue to a smoothly running power market with multiple transactions. Enhancement of available transfer Capability (ATC) is an important topic in current deregulation environment considering loop flows and heavily loaded lines. The thermal limits of transmission lines, v...
متن کاملFast Evaluation of Available Transfer Capability (ATC) Considering Integral Square Generator Angle (ISGA)
One of the concepts in restructuring the electric power industry is the ability to accurately and rapidly quantify the power transfer so-called as the available transfer capability (ATC). Accurate identification of ATC provides vital information for both planning and operation of the bulk power market in reserving transmission services. There are various methods used to determine ATC such as th...
متن کاملA New Strategy for Simultaneous Compensation of Instantaneous Reactive Power and Harmonics of Non-Linear Loads (RESEARCH NOTE)
This paper presents a new control method for simultaneous compensation of instantaneous reactive power and current harmonics by parallel active filters (PAFs). Reference compensating currents of PAF are calculated using the subtraction of instantaneous power from its average value. In this way, it is possible omitting high/low pass filter(s) from the control circuit of PAF, which usually result...
متن کامل