Eigenmode Identification in Campbell Diagrams
نویسندگان
چکیده
Jet engines need to be certified before going into service, i. e., any dangerous vibration has to be detected. Therefore the eigenmodes, displayed as curves in Campbell diagrams, need to be identified first. At the moment this is done manually by engineers. In this paper we introduce a way of automatically detecting eigenmodes in Campbell diagrams by introducing an extension of Hough transform.
منابع مشابه
The Effect of Damping and Stiffness of Bearing on the Natural Frequencies of Rotor-bearing System
In this paper, the effectiveness of stiffness and damping of bearing is investigated on the natural frequencies of the rotor-bearing system. The rotor-bearing system consists of a shaft, two bearings and a disk between two bearings. Parallel spring-damper in horizental and vertical directions is considered for modeling the stiffness and damping of bearings. The gyroscopic effect is also conside...
متن کاملMultiple regimes of operation in bimodal AFM: understanding the energy of cantilever eigenmodes
One of the key goals in atomic force microscopy (AFM) imaging is to enhance material property contrast with high resolution. Bimodal AFM, where two eigenmodes are simultaneously excited, confers significant advantages over conventional single-frequency tapping mode AFM due to its ability to provide contrast between regions with different material properties under gentle imaging conditions. Bimo...
متن کاملThe strange eigenmode in Lagrangian coordinates.
For a distribution advected by a simple chaotic map with diffusion, the "strange eigenmode" is investigated from the Lagrangian (material) viewpoint and compared to its Eulerian (spatial) counterpart. The eigenmode embodies the balance between diffusion and exponential stretching by a chaotic flow. It is not strictly an eigenmode in Lagrangian coordinates, because its spectrum is rescaled expon...
متن کاملModel identification and dynamic analysis of ship propulsion shaft lines
Dynamic response analysis of mechanical structures is usually performed by adopting numerical/analytical models. Finite element (FE) modeling as a numerical approach plays an important role in dynamic response analysis of complex structures. The calculated dynamic responses from FE analysis are only reliable if accurate FE models are used. There are many elements in real mechanical structures w...
متن کاملStudy of the Effects of Lacing Rods Location on Natural Frequencies in Last Stage Blades of a Steam Turbine
In this study, effects of lacing rods location on natural frequencies of last stage of a Steam Turbine Blades (STBs) have been investigated. STBs are critical and important elements in a turbine as well as power plants. One of the most important parameters in turbine blades is lacing rods location. In this paper, first, a three dimensional (3D) scan was used to produce the geometrical model of ...
متن کامل