Application of Confined Blasting in Water-Filled Deep Holes to Control Strong Rock Pressure in Hard Rock Mines
نویسندگان
چکیده
In extra-thick coal seams, mining operations can lead to large-scale disturbances, complex overburden structures, and frequent and strong strata behavior in the stope, which are serious threats to mine safety. This study analyzed the overburden structure and strata behavior and proposed the technique of confined blasting in water-filled deep holes as a measure to prevent strong rock pressure. It found that there are two primary reasons for the high effectiveness of the proposed technique in presplitting hard coal and rock. First, the fracture water enables much more efficient transfer of dynamic load due to its incompressibility. Second, the subsequent expansion of water can further split the rock by compression. A mechanical model was used to reveal how the process of confined blasting in water-filled deep holes presplit roof. Moreover, practical implementation of this technique was found to improve the structure of hard, thick roof and prevent strong rock pressure, demonstrating its effectiveness in roof control.
منابع مشابه
Implementation of Hyperbolic Tangent Function to Estimate Size Distribution of Rock Fragmentation by Blasting in Open Pit Mines
Rock fragmentation is one of the desired results of rock blasting. So, controlling and predicting it, has direct effects on operational costs of mining. There are different ways that could be used to predict the size distribution of fragmented rocks. Mathematical relations have been widely used in these predictions. From among three proposed mathematical relations, one was selected in this stud...
متن کاملارائه روشی جدید برای طراحی الگوی چال های انفجار در معادن روباز
A comprehensive investigation was carried out to minimize the cost price of the rock fragmentation process including: drilling, blasting, secondary blasting and separating the large boulders (oversize rocks) while loading, until the optimized fragmentation, powder factor and ratio of burden (B) to blasthole diameter (?h) were achieved by doing several stages of drilling and blasting practically...
متن کاملApplication of simulated annealing for optimization of blasting costs due to air overpressure constraints in open-pit mines
Estimating the costs of blasting operations is an important parameter in open-pit mining. Blasting and rock fragmentation depend on two groups of variables. The first group consists of mass properties, which are uncontrollable, and the second one is the drill-and-blast design parameters, which can be controlled and optimized. The design parameters include burden, spacing, hole length, hole diam...
متن کاملPrediction of fragmentation due to blasting using mutual information and rock engineering system; case study: Meydook copper mine
One of the key outcomes of blasting in mines is found to be rock fragmentation which profoundly affects downstream expenses. In fact, size prediction of rock fragmentation is the first leap towards the optimization of blasting design parameters. This paper makes an attempt to present a model to predict rock fragmentation using Mutual Information (MI) in Meydook copper mine. Ten parameters are c...
متن کاملPrediction of Blasting Cost in Limestone Mines Using Gene Expression Programming Model and Artificial Neural Networks
The use of blasting cost (BC) prediction to achieve optimal fragmentation is necessary in order to control the adverse consequences of blasting such as fly rock, ground vibration, and air blast in open-pit mines. In this research work, BC is predicted through collecting 146 blasting data from six limestone mines in Iran using the artificial neural networks (ANNs), gene expression programming (G...
متن کامل