Investigation of the stress singularity of a magnetoelectroelastic bonded antiplane wedge
نویسندگان
چکیده
The order of the stress singularity of a magnetoelectroelastic bonded antiplane wedge is analyzed by complex potential function and eigenfunction expansion method. Contrary to the familiar problem of elastic anisotropic bonded wedges which always produce real values for the order of singularity, the results of the magnetoelectroelastic bonded wedges may be real or complex. Numerical results are presented for problems with different boundary conditions. In particular, special behaviors of the order of the stress singularity for some degenerate composite materials and for some special wedge angles are noted. 2006 Elsevier Inc. All rights reserved.
منابع مشابه
Interfacial edge crack between two bonded dissimilar orthotropic strips under antiplane point loading
A closed-form solution is obtained for the interfacial edge crack between two bonded dissimilar orthotropic strips loaded by antiplane point loading in form of screw dislocation or line force. Conformal mapping and existing dislocation solutions are utilized for constructing the fundamental solution of the problem. The stress intensity factor (SIF) and the energy release rate (ERR) are obtained...
متن کاملScrew Dislocation Interacting with an Interfacial Edge Crack between Two Bonded Dissimilar Piezoelectric Wedges
This letter is concerned with an interfacial edge crack in a piezoelectric bimaterial wedge interacting with a screw dislocation under antiplane mechanical and in-plane electric loading. In addition to a discontinuous electric potential across the slip plane, the dislocation is subjected to a line-force and a line-charge at the tip. The out-of-plane displacement and electric potentials are obta...
متن کاملAn investigation of the stress singularity near the free edge of scarf joints
The singular stress field which develops at the interface corner of a scarf joint between two bonded elastic solids is investigated. Depending upon the scarf angle and the material elastic properties, the singular stresses at a radial distance r from an interface corner may be expressed in the form Hrλ−1, where λ − 1 is the order of the stress singularity and H is the intensity of the singulari...
متن کاملGeometric Optimization in Presence of Contact Singularities
The stress singularity of a sharp wedge contacting a frictionless half plane can be avoided by changing the wedge shape. Shape optimization is accomplished with the geometric strain method (GSM), an optimality criterion method. Several numerical examples are provided for different materials in the wedge and half plane to avoid stress singularity near the sharp corner of the wedge. Optimum wedge...
متن کاملInvestigation on the Effect of Tigthening Torque on the Stress Distribution in Double Lap Simple Bolted and Hybrid (Bolted -Bonded) Joints
In this research, the effects of torque tightening on the stress distribution in double lap simple bolted and hybrid (bolted-bonded) joints have been investigated numerically. In order to determine the bolt clamping force value due to tightening torque in simple bolted and hybrid joints, which is necessary in numerical simulation, an experimental approach has been proposed. To do so, two kinds ...
متن کامل