Tritium Production from Palladium Alloys
نویسندگان
چکیده
A number of palladium alloys have been loaded with deuterium or hydrogen under low energy plasma bombardment in a system that allows the continuous measurement of tritium. Long run times (up to 200 h) result in an integration of the tritium and this, coupled with the high intrinsic sensitivity of the system (~ 0.1nCi/l), enables the significance of the tritium measurement to be many sigma (>10). We will show the difference in tritium generation rates between batches of palladium alloys (Rh, Co, Cu, Cr, Ni, Be, B, Li, Hf, Hg and Fe) of various concentrations to illustrate that tritium generation rate is dependent on alloy type as well as within a specific alloy, dependent on concentration.
منابع مشابه
Tritium Production from a Low Voltage Deuterium Discharge on Palladium and Other Metals
Over the past year we have been able to demonstrate that a plasma loading method produces an exciting and unexpected amount of tritium from small palladium wires. In contrast to electrochemical hydrogen or deuterium loading of palladium, this method yields a reproducible tritium generation rate when various electrical and physical conditions are met. Small diameter wires (100 250 microns) have ...
متن کاملElectrochemical Loading of Hydrogen and Deuterium Into Palladium and Palladium-Boron Alloys
Excess power production and other anomalous effects have been observed during the electrolysis of heavy water using palladium and palladium-boron alloys as the cathode materials. This study focused on hydrogen and deuterium loading into palladium and palladium-boron alloys. Improved calorimetry provided for the detection of the exothermic heat of absorption of deuterium into palladium and palla...
متن کاملTritium Production in Palladium Deuteride/hydride in Evacuated Chamber
The controlled out-diffusion method was employed to induce a nuclear reaction in a palladium (Pd) plate with a MnOx film. The time-resolved mass spectra for Pd deuteride revealed tritium (T) production during the outdiffusion experiment. Similar time behaviors of mass number 1-4 and 6 in the spectra was also observed for Pd hydride. Film blackening was observed for most Pd deuteride as well as ...
متن کاملTritium production resulting from deuteration of different metals and alloys
Previous experiments have shown that tritium is produced in deuterated titanium. To better define the phenomenon a series of tests have been performed using various metals and alloys and different deuterating conditions. Sheets and shavings of titanium, zirconium, hafnium, tantalum, Zircaloy 2 and Ti-Zr 50% alloy have been tested. A statistical analysis of the tritium production shows that sign...
متن کاملDevelopment of Palladium-Alloy Membranes for Hydrogen Separation and Purification
This paper summarizes R&D activities and progress at NORAM Engineering and the University of British Columbia (UBC) on preparation and testing of thin palladium-based membranes and their applications. Most of these activities were carried out internally at NORAM, some jointly with UBC and their spin-off company, Membrane Reactor Technology (MRT) through a wide range of projects. Key results out...
متن کامل