Fenton ́s Process for the Treatment of Mixed Waste Chemicals

In recent years, with an increase in the stringent water quality regulations due to environmental concerns, extensive research has focused on upgrading current water treatment technologies and developing more economical processes that can effectively deal with toxic and biologically refractory organic contaminants in wastewater. In this context, in order to avoid or mitigate the possible adverse health, safety, and environmental impacts, to grantee compliance with federal, state, and local environmental laws, or only to set an example to students, many institutions of higher education have supported researches that aim to establish a treatment process for practical and economic disposal of waste chemicals. Waste chemicals in academic laboratories are by-products of research, teaching and testing activities. Waste chemicals from academic research laboratories can be considered one of the most polluting wastewaters and they pose more problems for the treatment and subsequent adequate disposal, due to their unique characteristics. These wastes are generated by laboratory operations, such as chemical analysis and research activities, including chemical and biological treatment experiments on a wide range of synthetic and natural wastewaters, and may include an abundance of unused laboratory reagents. Thus, they may present a great diversity of composition and volume, including refractory organics, toxic compounds and heavy metals, and may offer potential hazards to both health and environment. The ultimate destination of waste is usually a treatment, storage, and disposal facility (National Research Council, 1995). The treatment of waste chemicals is typically via chemical action, such as neutralization, precipitation and reduction to yield a less toxic waste. However, in most cases, the treatment product still cannot be safely disposed of in the sanitary sewer. Most generators also adopt the practice of land filling or direct incineration of hazardous wastes. In this scenario, the development of economical methods to achieve a high degree of wastewater treatment is highly desirable. The development and application of several Advanced Oxidation Processes (AOPs) to destroy toxic and biologically refractory organic contaminants in aqueous solutions concentrated significant research in the field of environmental engineering during the last decades. Among AOPs, the Fenton’s reagent is an interesting solution since it allows high depuration levels at room temperature and pressure conditions using innocuous and easy to handle reactants. The inorganic reactions involved in Fenton process are well established