PSPICE Implementation of an 8-bit Low Power Energy Recovery Full Adder
نویسنده
چکیده
Energy recovery technique has attracted interest of low power VLSI designers in recent years. This low power design technique has been proposed and discussed by many researchers. In this paper, we implemented energy recovery technique in the PSPICE using an 8-bit full adder circuit as an example. Full adder circuit has been widely used in arithmetic operations for addition, multipliers and Arithmetic Logic Unit (ALU). It is a building block used in digital signal processing, image processing and microprocessor. An 8-bit low power and low transistor count static energy recovery full adder (SERF) is implemented in this paper. The power consumption and general characteristics of the SERF adder are then compared with the 8-bit traditional CMOS full adder. PSPICE power simulation is used to verify its power consumption for the given input pattern sequence. Simulation result demonstrates effective power saving of the energy recovery full adder compared to static CMOS full adder.
منابع مشابه
Low-Power Adder Design for Nano-Scale CMOS
A fast low-power 1-bit full adder circuit suitable for nano-scale CMOS implementation is presented. Out of the three modules in a common full-adder circuit, we have replaced one with a new design, and optimized another one, all with the goal to reduce the static power consumption. The design has been simulated and evaluated using the 65 nm PTM models.
متن کاملDesign and Analysis of Conventional CMOS and Energy Efficient Adiabatic Logic for Low Power VLSI Application
In recent years, low power circuit design has been an important issue in VLSI design areas. Adiabatic logics, which dissipate less power than static CMOS logic, have been introduced as a promising new approach in low power circuit design. energy. This paper proposes an Adder circuit based on energy efficient two-phase clocked adiabatic logic. A simulative investigation on the proposed 1-bit ful...
متن کاملSymmetrical, Low-Power, and High-Speed 1-Bit Full Adder Cells Using 32nm Carbon Nanotube Field-effect Transistors Technology (TECHNICAL NOTE)
Carbon nanotube field-effect transistors (CNFETs) are a promising candidate to replace conventional metal oxide field-effect transistors (MOSFETs) in the time to come. They have considerable characteristics such as low power consumption and high switching speed. Full adder cell is the main part of the most digital systems as it is building block of subtracter, multiplier, compressor, and other ...
متن کاملA High-Speed Dual-Bit Parallel Adder based on Carbon Nanotube FET technology for use in arithmetic units
In this paper, a Dual-Bit Parallel Adder (DBPA) based on minority function using Carbon-Nanotube Field-Effect Transistor (CNFET) is proposed. The possibility of having several threshold voltage (Vt) levels by CNFETs leading to wide use of them in designing of digital circuits. The main goal of designing proposed DBPA is to reduce critical path delay in adder circuits. The proposed design positi...
متن کاملImplementation of an 8-bit Low-power Multiplier based on Reversible Gate Technology
Reversible logic has attracted tremendous interest among the researchers in low power VLSI field due to their simple structure and improved energy efficiency. In this paper, the implementation of an 8-bit low power multiplier based on reversible gate technology is reported. The structure of the reversible gate multiplier consists of following components: the first part is the reversible partial...
متن کامل