Design and evaluation of an optimal controller for simultaneous saccharification and fermentation process.

نویسندگان

  • Ganti S Murthy
  • David B Johnston
  • Kent D Rausch
  • M E Tumbleson
  • Vijay Singh
چکیده

Ethanol from corn is produced using dry grind corn process in which simultaneous saccharification and fermentation (SSF) is one of the most critical unit operations. In this work an optimal controller based on a previously validated SSF model was developed by formulating the SSF process as a Bolza problem and using gradient descent methods. Validation experiments were performed to evaluate the performance of optimal controller under different process disturbances that are likely to occur in practice. Use of optimal control algorithm for the SSF process resulted in lower peak glucose concentration, similar ethanol yields (13.38±0.36% v/v and 13.50±0.15% v/v for optimally controlled and baseline experiments, respectively). Optimal controller improved final ethanol concentrations as compared to process without optimal controller under conditions of temperature (13.35±1.28 and 12.52±1.19% v/v for optimal and no optimal control, respectively) and pH disturbances (12.65±0.74 and 11.86±0.49% v/v for optimal and no optimal control, respectively). Cost savings due to lower enzyme usage and reduced cooling requirement were estimated to be up to $1 million for a 151 million L/yr (40 million gal/yr) dry grind plant.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Process optimization for ethanol production from very high gravity (VHG) finger millet medium using response surface methodology

The Box-Wilson central composite design (CCD) based on response surface methodology (RSM) was used for ethanol fermentation using very high gravity (VHG) finger millet hydrolysate. Optimized process variables were namely, concentrations of yeast extract, magnesium sulphate and pH of the medium. High gravity mashes (>300 g dissolved solids per liter) were prepared by a thermo-stable α-amylase, f...

متن کامل

Optimal control strategies for simultaneous saccharification and fermentation of starch

Design and analysis of optimal control strategies for three types of inhibitory fed-batch bioprocesses have been discussed. These are simple saccharification (SS) of starch to glucose, simple fermentation (SF) of derived glucose to lactic acid (LA) and simultaneous saccharification and fermentation (SSF) of starch to LA. Various optimal feeding strategies have been investigated for the SSF proc...

متن کامل

Kinetic modeling of simultaneous saccharification and fermentation of corn starch for ethanol production.

Fuel ethanol production, using a simultaneous saccharification and fermentation process (SSF) of native starch from corn flour, has been performed using Saccharomyces cerevisiae and a granular starch hydrolyzing enzyme. The quantitative effects of mash concentration, enzyme dose and pH were investigated with the use of a Box-Wilson central composite design protocol. Proceeding from results obta...

متن کامل

The Effect of pH on Simultaneous Saccharification and Fermentation Process of Water Hyacinth (Eichhornia crassipes (Mart.) Solms.) Using Trichoderma harzianum and Saccharomyces cerevisiae

Research has been done on simultaneous saccharification and fermentation of water hyacinth (Eichhornia crassipes (Mart.) Solms.) with different pH to produce bioethanol. Simultaneous saccharification and fermentation process was the integration between saccharification or hydrolysis of cellulose into sugar and fermentation of sugar into ethanol, with utilized microorganism of Trichoderma harzia...

متن کامل

Simultaneous saccharification and ethanol fermentation of oxalic acid pretreated corncob assessed with response surface methodology.

Response surface methodology was used to evaluate optimal time, temperature and oxalic acid concentration for simultaneous saccharification and fermentation (SSF) of corncob particles by Pichia stipitis CBS 6054. Fifteen different conditions for pretreatment were examined in a 2(3) full factorial design with six axial points. Temperatures ranged from 132 to 180 degrees C, time from 10 to 90 min...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Applied biochemistry and biotechnology

دوره 166 1  شماره 

صفحات  -

تاریخ انتشار 2012