Flow Simulation Models for WinDAM
نویسنده
چکیده
Windows TM Dam Analysis Modules (WinDAM) is a set of modular software components that can be used to analyze overtopped earthen embankments and internal erosion of embankment dams. These software components are being developed in stages. The initial computational modules address routing of floods through the reservoir with dam overtopping and evaluation of the potential for vegetation or riprap to delay or prevent failure of the embankment. Subsequent modules incorporate dam breach analysis. Current work is underway to include analysis of internal erosion, non-homogeneous, zoned embankments, and the analysis of various other forms of embankment protection. The focus of this paper is on the development of new computational fluid dynamics (CFD) models from existing WinDAM models, and to determine the resulting flows using OpenFOAM. The next step will be to use these models to conduct coupled analysis at the particle-fluid level by coupling new erosion models based on the existing WinDAM erosion models with these CFD models.
منابع مشابه
Numerical Simulation of Turbulent Subsonic Compressible Flow through Rectangular Microchannel
In this study, turbulent compressible gas flow in a rectangular micro-channel is numerically investigated. The gas flow assumed to be in the subsonic regime up to Mach number about 0.7. Five low and high Reynolds number RANS turbulence models are used for modeling the turbulent flow. Two types of mesh are generated depending on the employed turbulence model. The computations are performed for R...
متن کاملRiver Flow Simulation Using SWAT Physically Based Model in Barandouzchay of Urmia Lake River Basin
Nowadays, there are too many models in the world for simulation of hydrological processes, such as the SWAT physically based model. The SWAT model is a continuous and physically based hydrologic model that is the smallest unit in this model is Hydrologic Response Unit, and all hydrological processes are simulated in each of these units. This model can simulate runoff, sedimentation, erosion and...
متن کاملNumerical simulation of flow in a fishway of Karkheh-Hamidieh diversion dam and environmental considerations to investigate possibility of fishway use in Mazandaran Province
Pool and weir is a type of fishway that provides a route for fish to migrate to damupstream. The effective parameters for fish swimming include velocity, water depth andturbulence. Several rubber dams have been under construction in Mazandaran Province, butthe necessary structures have not been built around them yet. When constructing these rubberdams, numerical models can be used to evaluate f...
متن کاملInternal combustion engines in cylinder flow simulation improvement using nonlinear k-ε turbulence models
The purpose of this paper is to studying nonlinear k-ε turbulence models and its advantages in internal combustion engines, since the standard k-ε model is incapable of representing the anisotropy of turbulence intensities and fails to express the Reynolds stresses adequately in rotating flows. Therefore, this model is not only incapable of expressing the anisotropy of turbulence in an engine c...
متن کاملNumerical Simulation of Flow Pattern around the Bridge Pier with Submerged Vanes
Bridges are very important for establishing communication paths. For this reason, it is important to control scour around bridge piers. Several methods have been proposed for scour control. One of the most useful methods is the use of submerged vanes. In the other hand, laboratory circumstances force many considered effective factors to be skipped in the scour phenomenon. In this situation, the...
متن کامل