Shaped Input Control of a System With Multiple Modes
نویسندگان
چکیده
This paper describes a method for limiting vibration in flexible systems that have more than one characteristic frequency and mode. It is only necessary to have knowledge of the component mode frequencies and damping ratios in order to be able to calculate the timing and magnitudes of the impulse sequence used in the shaping. Only two impulses, in the nonrobust case, or three impulses in a more robust case, are necessary regardless of the number of component frequencies. Simple tests are established to determine when this technique can be used and examples are presented.
منابع مشابه
Conical Conformal Antenna Design using the CPM Method for MIMO Systems
Abstract- In this article, the design of conformal antennas has been discussed using the characteristic modes (CM) method. For this purpose, the vector wave function(VWF) has been utilized to achieve a two-dimensional mapping of the conformal antenna. In designing and analyzing of cone-shaped antennas applicable for multi-input multi-output (MIMO) systems, the most important goal is to achieve ...
متن کاملA Multiband Multiple-input Multiple-output Antenna System for Long Term Evolution and Wireless Local Area Networks Handsets
A novel multiband multiple-input-multiple-output (MIMO) antenna system is proposed. The MIMO antenna system consists of two antenna elements, each of which comprises of three radiators: a driven monopole, an S-shaped strip and an inverted F-shaped strip and occupies footprint of 15x18.5x0.8 mm3 only. The driven monopole acts as a quarter-wave monopole and stimulate higher mode resonance. The tw...
متن کاملCOMPARISON BETWEEN MINIMUM AND NEAR MINIMUM TIME OPTIMAL CONTROL OF A FLEXIBLE SLEWING SPACECRAFT
In this paper, a minimum and near-minimum time optimal control laws are developed and compared for a rigid space platform with flexible links during an orientating maneuver with large angle of rotation. The control commands are considered as typical bang-bang with multiple symmetrical switches, the time optimal control solution for the rigid-body mode is obtained as a bang-bang function and app...
متن کاملIdentification of Multiple Input-multiple Output Non-linear System Cement Rotary Kiln using Stochastic Gradient-based Rough-neural Network
Because of the existing interactions among the variables of a multiple input-multiple output (MIMO) nonlinear system, its identification is a difficult task, particularly in the presence of uncertainties. Cement rotary kiln (CRK) is a MIMO nonlinear system in the cement factory with a complicated mechanism and uncertain disturbances. The identification of CRK is very important for different pur...
متن کاملDesign of a High-Bandwidth Y-Shaped Photonic Crystal Power Splitter for TE Modes
In this paper, a Y-shaped power splitter based on a two dimensional photonic crystal (PhC) for TE modes is designed and optimized. A triangular lattice of air holes is used for Y-shaped power divider. For analyzing these structures, plane wave expansion (PWE) and finite difference time domain (FDTD) methods are used. The simulation results show that more than 98% of the input power is transmitt...
متن کاملA Compact UWB Bandpass Filter with High Selectivity and Dual Notched-Band
A novel compact-sized ultra-wideband (UWB) bandpass filter (BPF) is proposed in this paper. The proposed BPF is highly selective and is able to eliminate WLAN signals from 5.15-5.35 GHz, and downlink of X-band satellite communication signals from 7.25-7.75 GHz. Generally, a multiple-mode resonator (MMR), comprised of a U-shaped line, with two high impedance stubs connected to it, and one steppe...
متن کامل