A cylindrical core-shell-like TiO2 nanotube array anode for flexible fiber-type dye-sensitized solar cells

نویسندگان

  • Jiefeng Yu
  • Dan Wang
  • Yining Huang
  • Xing Fan
  • Xin Tang
  • Cong Gao
  • Jianlong Li
  • Dechun Zou
  • Kai Wu
چکیده

A versatile anodization method was reported to anodize Ti wires into cylindrical core-shell-like and thermally crystallized TiO2 nanotube (TNT) arrays that can be directly used as the photoanodes for semi- and all-solid fiber-type dye-sensitized solar cells (F-DSSC). Both F-DSSCs showed higher power conversion efficiencies than or competitive to those of previously reported counterparts fabricated by depositing TiO2 particles onto flexible substrates. The substantial enhancement is presumably attributed to the reduction of grain boundaries and defects in the prepared TNT anodes, which may suppress the recombination of the generated electrons and holes, and accordingly lead to more efficient carrier-transfer channels.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Influence of nanostructured TiO2 film thickness on photoelectrode structure and performance of flexible Dye- Sensitized Solar Cells

A  commercial  Ti-Nanoxide  was  deposited  on  In-doped  SnO2 (ITO) polymer  substrates by  tape casting  technique with different thicknesses  (7,  14  and  36μm)  to  be  used  as  photoelectrode  in flexible  dye-sensitized  solar  cells  (DSSCs).  Ruthenium  dye  was adsorbed on each TiO2 film for 24 h. The resulting photoelectrodes were used to form flexible DSSCs in combination with...

متن کامل

High Efficient Transparent TiO2 Nanotube Dye-Sensitized Solar Cells: Adhesion of TiO2 Nanotube Membrane to FTO by Two Different Methods

In order to fabricate transparent TiO2 nanotube dye-sensitized solar cells, anodically growth nanotube membranes are detached from Ti substrate by a re-anodization method. The membranes are transferred on FTO glass by two different methods. At the first one, 100mM Ti-isopropoxide is used to make TiO2 nanoparticles for adhering TiO2 nanotube membranes to FTO and ...

متن کامل

Influence of TiO2 layer thickness as photoanode in Dye Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) are categorized as some of inexpensive thin-film solar cells. The basis and foundation of these cells is a semiconductor that consists of an electrolyte and a light-sensitive anode. Titanium dioxide (TiO2) is a semiconductor that plays the role of anode and is the main constituent of these cells. In this paper, we have addressed the functionality and performan...

متن کامل

Effect of TiO2 nanotube length and lateral tubular spacing on photovoltaic properties of back illuminated dye sensitized solar cell

The main objective of this study is to show the effect of TiO2 nanotube length, diameter and intertubular lateral spacings on the performance of back illuminated dye sensitized solar cells (DSSCs). The present study shows that processing short TiO2 nanotubes with good lateral spacings could significantly improve the performance of back illuminated DSSCs. Vertically aligned, uniform sized diamet...

متن کامل

Synthesis and characterization of Ag-doped TiO2 nanostructure and investigation of its application as dye-sensitized solar cell

A new strategy for enhancing the efficiency of TiO2 dye-sensitized solar cells (DSSCs) by doping foreign ion into TiO2 lattice via sol-gel process is reported. DSSCs are based on a semiconductor (i.e., TiO2), formed between a photo-sensitized anode and an electrolyte. In order to reach high conversion efficiency, it is important to increase the electron injection and optical absorption. One pro...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 6  شماره 

صفحات  -

تاریخ انتشار 2011