Sub Topic: Coal and Biomass Combustion and Gasification

Results are reported from recent tests where hydrothermal flames spontaneously ignited in a Supercritical Water Oxidation (SCWO) Test Cell. Hydrothermal flames are generally categorized as flames that occur when appropriate concentrations of fuel and oxidizer are present in supercritical water (SCW); i.e., water at conditions above its critical point (218 atm and 374 °C). A co-flow injector was used to inject fuel, comprising an aqueous solution of 30%-vol to 50%-vol ethanol, and air into a reactor held at constant pressure and filled with supercritical water at approximately 240 atm and 425 °C. Hydrothermal flames auto-ignited and quickly stabilized as either laminar or turbulent diffusion flames, depending on the injection velocities and test cell conditions. Two orthogonal views, one of which provided a backlit shadowgraphic image, provided visual observations. Optical emission measurements of the steady state flame were made over a spectral range spanning the ultraviolet (UV) to the near infrared (NIR) using a high-resolution, high-dynamic-range spectrometer. Depending on the fuel/air flow ratios varying degrees of sooting were observed and are qualitatively compared using light absorption comparisons from backlit images.