Biodegradation of Styrene-Butadiene-Styrene Coploymer via Sugars Attached to the Polymer Chain
نویسندگان
چکیده
A synthetic method was developed to chemically attach few molecules of simple sugars like glucose, mannose, galactose, maltose and xylose (0.09 0.37 wt%) and with quaternary nitrogen pendants (0.42 0.46 atomic%) along the polybutadiene section of polystyrene-block-polybutadiene-block-polystyrene (SBS) block copolymer. These functionalized SBS copolymers were evaluated for biodegradation using the fungal culture Aspergillus niger NCIM 1025 (ATCC 9642) and bacterial culture Pseudomonas sp. NCIM 2220, and for antimicrobial properties using bacteria E. coli DH5α and Bacillus subtilis and yeasts Pichia stipitis NCIM 3497 and P. stipitis NCIM 3499. It was conclusively demonstrated that these modified SBS block copolymers were significantly more biodegradable than the unmodified SBS; the observed weight loss after biodegradation was ~4 14-fold for bacterial and ~7 36-fold for fungal cultures with respect to the sugar content of modified SBS. Preliminary studies on antimicrobial properties of these biodegradable polymers showed a 4% 24% decrease in growth of the microorganisms E. coli and Bacillus subtilis studied.
منابع مشابه
Engineering Properties of SMA Mixtures/Polymer/RGP Blends
In this research, the efficiency of Recycled Glass Powder (RGP) is evaluated for improvement of polymer-modified bitumen and asphalt mixture performance. An extensive laboratory programm was undertaken for polymer-modified bitumen including Crumb Rubber (CR), Styrene Butadiene Styrene (SBS) and Styrene Butadiene Rubber (SBR). Rheological and mechanical proper...
متن کاملDetermination of the chemical composition distribution of copolymers of styrene and butadiene by gradient polymer elution chromatography
In order to determine the chemical composition distribution (CCD) of styrene-butadiene copolymers, gradient polymer elution chromatography has been performed. The separation is mainly based on differences in solubility among the copolymer molecules with different chemical composition. The solubility of a copolymer is dependent on the following parameters: temperature, type of solvent/non-solven...
متن کاملTrans-stereospecific polymerization of butadiene and random copolymerization with styrene using borohydrido neodymium/magnesium dialkyl catalysts
The combination of a neodymium borohydride, Nd(BH4)3(THF)3 (1) or Cp*Nd(BH4)2(THF)x (2), with MgBuEt (BEM), affords an efficient and highly selective (up to 96.7% 1,4-trans) catalyst for butadiene polymerization. In the presence of excesses of Mg co-catalyst, polymer chain transfer takes place between neodymium and magnesium, and significant amounts of 1,2-units are observed. When considered fo...
متن کاملEffect of carbon black and fly ash co-fillers content on mechanical and thermal behaviors of styrene butadiene rubber compounds
Fly ash (FA) is produced as a waste byproduct during the burning process of coal in thermal power plants whose cost is primarily associated to cleaning and transportation. It possesses mechanical properties on account of its constituents like silica and alumina. The use of FA as filler in styrene butadiene rubber (SBR) was of researchers’ interest to reinforce and/or to reduce product cost. In ...
متن کاملVolatile Substances in Polymer Toys Made from Butadiene and Styrene
The residual levels and migration behavior of volatile substances were detected using HS-GC/MS for acrylonitrile-butadiene-styrene copolymer (ABS) toys, thermoplastic elastomer toys, and rubber toys made from 1,3-butadiene and styrene found on the Japanese market. The maximum residual level of these volatile substances was 2600 μg/g of styrene in ABS toys. In particular, the levels of known car...
متن کامل