The Optimization Design of Six-bar Linkage Mechanism
نویسنده
چکیده
At present, multi-bar linkage mechanism is one of the most important directions of mechanical presses’ development. Utilizing the typical multi-linkage drawing mechanism of the plunger slide and compounding its parameters scientifically are a fairly effective way to realize the drawing technology demand. This paper established kinematics mode of the six-bar drawing mechanism by bar-group method, and produced simulated system by Visual Basic, which simulated the actual motion of the mechanism. With the objective function-velocity fluctuation in drawing and drawing depth, using chaos genetic algorithm method, carried out optimization design of the mechanism, and acquired several groups’ data. The optimization results showed that their performance in kinematics was improved greatly and had exceeded the original mechanism.
منابع مشابه
Dynamic Behavior Analysis of a Planar Four-bar Linkage with Multiple Clearances Joint
In practice, clearances in the joints are inevitable due to tolerances, and defects arising from design and manufacturing. In the presence of clearance at a joint, a mechanism gains some additional, uncontrollable degrees of freedom which are the source of error. Moreover, joints undergo wear and backlashes and so cannot be used in precision mechanisms. In this study, the dynamic behaviour of ...
متن کاملLinkage factors optimization of Multi-outputs of compliant mechanism using Response Surface
This paper presents a linkage factors synthesis and multi-level optimization technique for bi-stable compliant mechanism. The linkage synthesis problem is modeled as multiple level factors and responses optimization problem with constraints. The bi-stable compliant mechanism is modeled as a crank slider mechanism using pseudo-rigid-body model (PRBM). The model exerts the large deflection of fle...
متن کاملSimulation of Human Foot Mechanism with a Degree of Freedom Motion
The need for simulation of human foot mechanism has made researchers and engineers move towards different patterns to describe this movement. In this regard, optimal solutions such as energy consumption, accuracy, etc. are of utmost importance. In this paper, efforts have been made to present a new solution by designing a fully two-dimensional six-bar mechanism with one degree of freedom so tha...
متن کاملNeuro-Optimizer: A New Artificial Intelligent Optimization Tool and Its Application for Robot Optimal Controller Design
The main objective of this paper is to introduce a new intelligent optimization technique that uses a predictioncorrectionstrategy supported by a recurrent neural network for finding a near optimal solution of a givenobjective function. Recently there have been attempts for using artificial neural networks (ANNs) in optimizationproblems and some types of ANNs such as Hopfield network and Boltzm...
متن کاملPareto Optimal Balancing of Four-bar Mechanisms Using Multi-Objective Differential Evolution Algorithm
Four-bar mechanisms are widely used in the industry especially in rotary engines. These mechanisms are usually applied for attaining a special motion duty like path generation; their high speeds in the industry cause an unbalancing problem. Hence, dynamic balancing is essential for their greater efficiency. In this research study, a multi-objective differential evolution algorithm is used for P...
متن کامل