THE INFLUENCE OF TRANSVERSE, COMPRESSIVE STRESS ON THE CRITICAL CURRENT OF MULTIFILAMENTARY Nb,Sn AND NbTi WIRES
نویسنده
چکیده
In order to investigate the critical current of multifilamentary wires as a function of the applied field and transverse, compressive stress, a special experimental arrangement has been developed. In this arrangement, the repulsive Lorentz force generated by a set of magnets is used, to press a sample between two parallel surfaces. From the first experimental results on a multifilamentary NbTi wire, it is concluded that the arrangement functions properly.
منابع مشابه
Influence of Production Parameters on the Superconducting Properties of Nbti and Nb$n Wires
The commercial specification of superconducting NbTi and Nb,Sn composite wires is normally given by a few numbers : I,(p,B,T), n, RRR, wire and filament diameter and twist length. To some extent their values cannot be chosen independently, nor do they guarantee proper operation of the system in all aspects, for instance fields in dipoles for accelerators. For Nb,Sn composites, depending on the ...
متن کاملNioboaeschynite-(Ce), Ce(NbTi)O6
Nioboaeschynite-(Ce), ideally Ce(NbTi)O(6) [cerium(III) niobium(V) titanium(IV) hexa-oxide; refined formula of the natural sample is Ca(0.25)Ce(0.79)(Nb(1.14)Ti(0.86))O(6)], belongs to the aeschynite mineral group which is characterized by the general formula AB(2)(O,OH)(6), where eight-coordinated A is a rare earth element, Ca, Th or Fe, and six-coordinated B is Ti, Nb, Ta or W. The general st...
متن کاملCompact, inexpensive coaxial terminations and wiring for low temperature RF applications
We have examined a promising family of radio frequency coaxial connectors (the SSMCX range) suitable for use at low temperatures. We describe the measured characteristics of these connectors in typical arrangements using lossy Cooner stainless steel inner and outer (braided) coaxial cable and other specialty low temperature coaxial cables including Beryllium Copper (BeCu) outer and inner conduc...
متن کاملNb Sn Accelerator Magnet Technology R & D at Fermilab
INTRODUCTION Nb3Sn accelerator magnets allow magnet operation above 10 T and drastically increase the coil temperature margin relative to NbTi magnets. Magnets with such parameters are needed for the LHC IR upgrade, cr mponents of ILC, MSR and MC magnet systems. Fermilab is developing Nb3Sn accelerator magnets using shell-type dipole coils and the wind-and-react method. The R&D program includes...
متن کاملRestricted , Novel Heat Treatments for Obtaining High
The effect of greatly restricting heat treatment time and temperature, as well as the strain space between heat treatments was investigated for a high homogeneity Nb46.5wt% composite. The number of heat treatments was 3 or 6. It was found that the crucial heat treatment was the final one and that the initial ones could be considerably restricted. A strong linear relationship was found between J...
متن کامل