Strengthening of Shear Deficient Reinforced Concrete Beams Retrofitted with Cement-based Composites
نویسندگان
چکیده
The restoration of strength and stiffness of damaged reinforced concrete beams with deficient reinforcements, through retrofitting, was experimentally and numerically studied. Retrofitting is carried out by wrapping glass fiber strips using cement-based composite binders. Six beams of size 1500mm (length) x100mm (width) x 150mm (depth) have been tested in four-point bending. Three beams are used as reference beams, whereas the other three are cast as shear deficient beams and loaded up to first few cracks.The damaged beams were repaired, cured and retrofitted. Flexure test is carried out to find the average ultimate load, maximum deflection, maximum moment, stiffness, energy absorption and crack pattern of reference and preloaded retrofitted beams. Numerical analysis is carried out for the similar shear deficient beams. It is concluded that the ultimate load and moment carrying capacity were restored in preloaded retrofitted beams. The stiffness and energy absorption are improved in preloaded wrapped beams with deflection at ultimate load being reduced.
منابع مشابه
Experimental Strengthening of the Two-way Reinforced Concrete Slabs with High Performance Fiber Reinforced Cement Composites Prefabricated Sheets
Reinforced concrete structures need to be strengthened and retrofitted for various reasons, including errors during design and/or construction, so in most cases strengthening of structural elements is much more economical than rebuilding the structure. Using HPFRCC with tensile stiffening behavior has been developed to strengthen the concrete structures over the recent few years. In this paper,...
متن کاملAn Experimental Study on Shear Strengthening of RC Lightweight Deep Beams Using CFRP
. This paper presents the results of an experimental investigation on shear strength enhancement of reinforced concrete deep beams externally reinforced with fiber reinforced polymer (FRP) composites. A total of six deep beam specimens of two different classes, as-built (unstrengthened) and retrofitted were tested in the experimental evaluation program. Two composite systems namely carbon/epoxy...
متن کاملFlexural Strengthening of Deficient Reinforced Concrete Beams with Post-Tensioned Carbon Composites using Finite Element Modelling
The application of external post-tensioned steel bars as an effective way to strengthen an existing bridge has been so far used in many different countries. In recent decades, however, they have been replaced by bars made from Carbon Fiber Reinforced Polymer (CFRP), as a material with high tensile strength and corrosion resistance, to address several concerns with steel bars such as their appli...
متن کاملExperimental and Theoretical Investigation on Shear Strengthening of RC Precraced Continuous T-beams Using CFRP Strips
Carbon fiber reinforced polymer (CFRP) sheets are externally bonded to reinforced concrete (RC) members to provide additional strength such as flexural, shear, etc. It has been widely accepted that carbon fiber reinforced polymers (CFRPs) can be used effectively to strengthen reinforced concrete (RC) members. This paper is intended to study and use externally bonded CFRP strips to repair and st...
متن کاملEffect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites
Debonding failure is the main failure mode in flexurally strengthened reinforced concrete beams by externally bonded or near surface mounted fibre reinforced polymer (FRP) composites. It is believed that FRP debonding will be initiated if the shear stress on the concrete-FRP interface reaches the tensile strength of concrete. However, it was found through experimental and analytical studies tha...
متن کامل