Evaluation of CI In-Cylinder Flow using optical and numerical techniques
نویسندگان
چکیده
In order to evaluate different port concepts for modern Compression-Ignition engines, usually quantities as the swirl level and the flow coefficient are evaluated, which are measured on a stationary flow test bench. As additional criterion, in this work, the homogeneity of the swirl flow is introduced and defined quantitatively. Different valve lift strategies are evaluated using three-dimensional Particle Imaging Velocimetry in a stationary flow configuration and transient In-Cylinder CFD simulation using both the Reynolds Averaged Navier Stokes equation and the Large Eddy simulation approach.
منابع مشابه
Numerical simulation of in-cylinder tumble flow field measurements and comparison to experimental results
This paper presents a comparison between measured and predicted results of the in-cylinder tumble flow and the flow coefficient generated by a port-valve-liner assembly on a steady-flow test bench. In this study, computational fluid dynamics (CFD) methods were employed to gain further insight into characteristics of an engine. The purpose was to advance understanding of the stationary turbulenc...
متن کاملDirect Numerical Simulation of the Wake Flow Behind a Cylinder Using Random Vortex Method in Medium to High Reynolds Numbers
Direct numerical simulation of turbulent flow behind a cylinder, wake flow, using the random vortex method for an incompressible fluid in two dimensions is presented. In the random vortex method, the primary variable is vorticity of the flow field. After generation on the cylinder wall, it is followed in two fractional time step in a Lagrangian system of coordinates, namely convection and diffu...
متن کاملNumerical Simulation of the Incompressible Laminar Flow Over a Square Cylinder
Simulation of fluid flow over a square cylinder can be performed in order to understand the physics of the flow over bluff bodies. In the current study, incompressible laminar flow over a confined square cylinder, with variable blockage factor has been simulated numerically, using computational fluid dynamics (CFD). The focus has been on vortex-induced vibration (VIV) of the cylinder. Vorticity...
متن کاملNumerical Simulation of Fluid Flow Past a Square Cylinder Using a Lattice Boltzmann Method
The method of lattice boltzmann equation(LBE) is a kinetic-based approach for fluid flow computations. In the last decade, minimal kinetic models, and primarily the LBE, have met with significant success in the simulation of complex hydrodynamic phenomena, ranging from slow flows in grossly irregular geometries to fully developed turbulence, to flow with dynamic phase transitions. In the presen...
متن کاملNumerical investigation on the effects of six control rods arranged in equilateral triangular configurations on fluid flow and forced convection heat transfer from a circular cylinder
The present work deals with heat transfer characteristics as well as fluid flow patterns in laminar flow regime for a circular cylinder with six control rods arranged in equilateral triangular geometries. The computations have been carried out by a finite volume approach using the overset grid method. The unsteady flow at Re= 200 and Pr= 0.7 and 7.0 was examined. The effect of the control rods ...
متن کامل