The Eggshell Approach for the Computation of Electromagnetic Forces in 2d and 3d
نویسندگان
چکیده
The expressions of the Lie derivative of differential forms in the language of vector analysis are introduced. These formulae allow to describe naturally the electromechanical coupling, and the coupling term appears to be a volume integral. A general approach to compute forces is then proposed, which takes that fact into consideration. The method is applicable in 2D and in 3D, and with dual formulations. Numerical evidences of its efficiency are given.
منابع مشابه
هینه‌سازی مسیر هاد‌ی‌های انتقال در محفظه فلزی تجهیزات الکتریکی مبتنی بر سازگاری الکترومغناطیسی با استفاده از روش تصمیم‌گیری چند معیاره مطالعه موردی: سیستم تزریق جریان 25 کیلو آمپر
The higher frequency transient signals generated as a result of a power system fault or disturbance provide the basis for an alternative approach to power system containing connectors and cables result in unsuitable operation of the system. However one major challenge is the need to ensure that the transients to be neutralized by electromagnetic compatibility (EMC) issues and cabling routes. T...
متن کاملCharacterization of Power Transformer Electromagnetic Forces Affected by Winding Faults
Electromagnetic forces in power transformer windings are produced by interaction between the leakage fluxes and current passing them. Since the leakage flux distribution along the windings height is in two axial and radial directions, so the electromagnetic forces have two components, radial and axial. There is a risk that a large electromagnetic force due to the short circuit or inrush current...
متن کاملA Low Friction Demanding Approach in Gait Planning for Humanoid Robots During 3D Manoeuvres
This paper proposes a gait planning approach to reduce the required friction for a biped robot walking on various surfaces. To this end, a humanoid robot with 18 DOF is considered to develop a dynamics model for studying various 3D manoeuvres. Then, feasible trajectories are developed to alleviate the fluctuations on the upper body to resemble human-like walking. In order to generate feasible w...
متن کاملمدلسازی عددی و تحلیل نیروهای الکترومغناطیسی ترانسفورماتور اُوال و مقایسه آن با ترانسفورماتور سیلندری با استفاده از روش اجزای المان محدود
Distribution transformers with OVAL windings introduces as optimal Optimums transformers in the lowest power. Because consumption of Iron and copper decrease in these transformers, it decreases Loss of power transformers than cylindertransformers. Pay attention to the level of deformation transformers in OVAL, its electromagnetic forces will be reduced. All Articles have given different methods...
متن کاملDimensionality analysis of subsurface structures in magnetotellurics using different methods (a case study: oil field in Southwest of Iran)
Magnetotelluric (MT) method is an electromagnetic technique that uses the earth natural field to map the electrical resistivity changes in subsurface structures. Because of the high penetration depth of the electromagnetic fields in this method (tens of meters to tens of kilometers), the MT data is used to investigate the shallow to deep subsurface geoelectrical structures and their dimensions....
متن کامل