Improved light extraction efficiency in organic light emitting diodes with a perforated WO3 hole injection layer fabricated by use of colloidal lithography.
نویسندگان
چکیده
We present an organic light emitting diode with a perforated WO3 hole injection layer to improve the light extraction efficiency. The two-dimensionally perforated WO3 layer was fabricated by use of colloidal lithography. The light extraction efficiency was improved due to Bragg scattering of waveguide modes and surface plasmon polaritons, and the operating voltage was also decreased. As a result, the external quantum efficiency and the power efficiency were increased as compared with those of conventional organic light emitting diodes without WO3 layer. The angular dependence of emission characteristics was investigated by measuring radiant intensity profiles for emission angles and azimuthal angles.
منابع مشابه
Influences of Device Architectures on Characteristics of Organic Light-Emitting Devices Incorporating Ambipolar Blue-Emitting Ter(9,9-diarylfluorenes)
In this article, we report the studies of various device architectures of organic lightemitting devices (OLEDs) incorporating highly efficient blue-emitting and ambipolar carriertransport ter(9,9-diarylfluorene)s, and their influences on device characteristics. The device structures investigated include single-layer devices and multilayer heterostructure devices employing the terfluorene as one...
متن کاملHigh-Efficiency, Solution-Processed, Multilayer Phosphorescent Organic Light-Emitting Diodes with a Copper Thiocyanate Hole-Injection/Hole-Transport Layer
Copper thiocyanate (CuSCN) is introduced as a hole-injection/hole-transport layer (HIL/HTL) for solution-processed organic light-emitting diodes (OLEDs). The OLED devices reported here with CuSCN as HIL/HTL perform significantly better than equivalent devices fabricated with a PEDOT:PSS HIL/HTL, and solution-processed, phosphorescent, small-molecule, green OLEDs with maximum luminance ≥10 000 c...
متن کاملPhoto-Crosslinking of Pendent Uracil Units Provides Supramolecular Hole Injection/Transport Conducting Polymers for Highly Efficient Light-Emitting Diodes
A new process for modifying a polymeric material for use as a hole injection transport layer in organic light-emitting diodes has been studied, which is through 2π + 2π photodimerization of a DNA-mimetic π-conjugated poly(triphenylamine-carbazole) presenting pendent uracil groups (PTC-U) under 1 h of UV irradiation. Multilayer florescence OLED (Organic light-emitting diodes) device with the PTC...
متن کاملImproved hole-injection contact for top-emitting polymeric diodes
Articles you may be interested in Lithium fluoride injection layers can form quasi-Ohmic contacts for both holes and electrons Appl. Efficient inverted top-emitting organic light-emitting diodes using ultrathin MoO 3 / C 60 bilayer structure to enhance hole injection Appl. Tuning hole injection and charge recombination with self-assembled monolayer on silver anode in top-emitting organic light-...
متن کاملHigh Luminance Organic Light-Emitting Diodes with Efficient Multi-Walled Carbon Nanotube Hole Injectors
2 ABSTRACT: We report high luminance organic light-emitting diodes with a simple and easy processing device structure, by use of acid functionalized multi-walled CNTs as efficient hole injectors. At only 10 V, the luminance can reach nearly 50,000 cd/m 2 with an external quantum efficiency over 2% and a current efficiency greater than 21 cd/A. The investigation of hole-only devices shows that t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 20 Suppl 2 شماره
صفحات -
تاریخ انتشار 2012