Optical Sensing of the Fatigue Damage State of CFRP under Realistic Aeronautical Load Sequences
نویسندگان
چکیده
We present an optical sensing methodology to estimate the fatigue damage state of structures made of carbon fiber reinforced polymer (CFRP), by measuring variations on the surface roughness. Variable amplitude loads (VAL), which represent realistic loads during aeronautical missions of fighter aircraft (FALSTAFF) have been applied to coupons until failure. Stiffness degradation and surface roughness variations have been measured during the life of the coupons obtaining a Pearson correlation of 0.75 between both variables. The data were compared with a previous study for Constant Amplitude Load (CAL) obtaining similar results. Conclusions suggest that the surface roughness measured in strategic zones is a useful technique for structural health monitoring of CFRP structures, and that it is independent of the type of load applied. Surface roughness can be measured in the field by optical techniques such as speckle, confocal perfilometers and interferometry, among others.
منابع مشابه
Surface Irregularity Factor as a Parameter to Evaluate the Fatigue Damage State of CFRP
This work presents an optical non-contact technique to evaluate the fatigue damage state of CFRP structures measuring the irregularity factor of the surface. This factor includes information about surface topology and can be measured easily on field, by techniques such as optical perfilometers. The surface irregularity factor has been correlated with stiffness degradation, which is a well-accep...
متن کاملCumulative Fatigue Damage Under stepwise Tension-Compression Loading
Rock structures are subjected to cyclic tension-compression loading due to a blasting, earthquake, traffic and injection-production in underground storage case. Therefore study the fatigue behavior of rock samples under this type of loading is required. In this study, the accumulated fatigue damage for a Green Onyx rock sample which consisted of only one mineral composition with two-step high-l...
متن کاملDevelopment of a Design Procedure for Aeronautical Structures Based on Reliability
In this paper, an approach to aeronautical structural design based on reliability analysis is presented. In this way, the concept of level of safety is discussed and methods of its calculation using statistical data are described. Based on the concept of level of safety, a design procedure is proposed. In order to validate this design procedure, two design cases are studied. In the first case s...
متن کاملStrain and Damage Sensing Property of Self-compacting Concrete Reinforced with Carbon Fibers
Present paper investigated the strain and damage sensing property on concrete cubes embedded with carbon fibers. Concrete cubes of dimension 150 mm have been casted with different concentration of carbon fibers to study the strain and damage sensing property under cyclic loading that can be further used for health monitoring as non-destructive testing (NDT) approach. All the specimens were test...
متن کاملEffect of Impact Load on the Bond between Steel and CFRP Laminate
Carbon fiber reinforced polymers strengthen steel structural elements. These structural elements are normally subjected to static, dynamic and fatigue loadings during their life-time. CFRP laminate is commonly used structures under the subjected loads. A number of focused on the characteristics of CFRP sheets members under static, dynamic and fatigue loadings. is a gap in understanding the bond...
متن کامل