A Review on Adsorption of Fluoride from Aqueous Solution

نویسندگان

  • Mirna Habuda-Stanić
  • Maja Ergović Ravančić
  • Andrew Flanagan
چکیده

Fluoride is one of the anionic contaminants which is found in excess in surface or groundwater because of geochemical reactions or anthropogenic activities such as the disposal of industrial wastewaters. Among various methods used for defluoridation of water such as coagulation, precipitation, membrane processes, electrolytic treatment, ion-exchange, the adsorption process is widely used. It offers satisfactory results and seems to be a more attractive method for the removal of fluoride in terms of cost, simplicity of design and operation. Various conventional and non-conventional adsorbents have been assessed for the removal of fluoride from water. In this review, a list of various adsorbents (oxides and hydroxides, biosorbents, geomaterials, carbonaceous materials and industrial products and by-products) and its modifications from literature are surveyed and their adsorption capacities under various conditions are compared. The effect of other impurities on fluoride removal has also been discussed. This survey showed that various adsorbents, especially binary and trimetal oxides and hydroxides, have good potential for the fluoride removal from aquatic environments.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Defluoridation of Aqueous Solution by Graphene and Graphene Oxide Nanoparticles: Thermodynamic and Isotherm Studies

Fluoride, a non-essential element, can enter water resources through several natural processes and human activities. The benefits and risks of fluoride depend on the concentration of this anion on drinking waters. In the present study, the performances of graphene and graphene oxide nanoparticles were investigated for the removal of fluoride from aqueous solution. In the present resea...

متن کامل

Fluoride Ions Removal using Yttrium Alginate Biocomposite from an Aqueous Solution (RESEARCH NOTE)

Removal of fluoride ions was investigated using a new adsorbent of yttrium alginate biocomposite (YALG). Effect of various parameters such as pH, contact time, initial concentration of fluoride ions and temperature on the sorption capacity of adsorbent was studied. Performing a mathematical assessment of fluoride sorption, isotherm and kinetics models including Freundlich & Langmuir isotherms a...

متن کامل

Application of response surface methodology for optimization of fluoride adsorption from aqueous solution using MgO-based nanocomposites

Deleterious effect of high concentration fluoride in water resources on the healthof human. The MgO supported Fe-Co-Mn nanoparticles were produced via coprecipitationmethod and characterized by SEM and FTIR techniques. In the work,the adsorption process optimization was performed by response surface modelingwith the help of Minitab 16 software. The effect of independent ...

متن کامل

Fluoride Removal from Aqueous Solutions by NaOH-Modified Eucalyptus Leaves

Introduction: Fluoride (F) and its compounds are widely used in industries in which fluoride overdose leads to various detrimental diseases. In this study the effect of NaOH-modified Eucalyptus leaves on fluoride removal from aqueous solutions as a natural adsorbent was investigated. Materials and Methods: The focus of this study was on the effects of parameters such as pH (2-12), initial conc...

متن کامل

A Review on Diclofenac Removal from Aqueous Solution, Emphasizing on Adsorption Method

Diclofenac is a drug with an analgesic effect that accumulates and results in adverse consequences if it enters the human body more than needed. Low concentrations of diclofenac have been detected in different water sources through leachates of landfills and agricultural areas, human and animal excreta expired drug discharge and hospital effluents. To eliminate diclofenac from the aquatic e...

متن کامل

Uranium Removal from Aqueous Solution Using Ion-Exchange Resin DOWEX® 2x8 in the Presence of Sulfate Anions

The current study was attributed to uranium (VI) ions adsorption using a anion exchanger resin, Dowex®2x8, in the presence of sulfate anions. Evaluation of operational parameters including contact time, pH, initial concentration of uranium ions, and presence of various anions (including phosphate, sulfate, chloride, fluoride, and nitrate) in the solution was assessed on sorption performance of ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 7  شماره 

صفحات  -

تاریخ انتشار 2014