Experimental and Numerical Characterization of a Hybrid Fabry-Pérot Cavity for Temperature Sensing
نویسندگان
چکیده
A hybrid Fabry-Pérot cavity sensing head based on a four-bridge microstructured fiber is characterized for temperature sensing. The characterization of this cavity is performed numerically and experimentally in the L-band. The sensing head output signal presents a linear variation with temperature changes, showing a sensitivity of 12.5 pm/°C. Moreover, this Fabry-Pérot cavity exhibits good sensitivity to polarization changes and high stability over time.
منابع مشابه
Use of Fabry-Pérot lasers for simultaneous distributed strain and temperature sensing based on hybrid Raman and Brillouin scattering
In this paper we propose the use of multi-longitudinal mode lasers, such as Fabry-Pérot (FP) lasers, for simultaneous distributed strain and temperature sensing based on hybrid Brillouin and Raman scattering. Fabry-Pérot lasers allow for high-power Raman intensity measurement and the simultaneous detection of the Brillouin frequency shift parameter for all FP longitudinal modes, by using a self...
متن کاملTemperature-insensitive refractive index sensing by use of micro Fabry-Pérot cavity based on simplified hollow-core photonic crystal fiber.
A temperature-insensitive micro Fabry-Pérot (FP) cavity based on simplified hollow-core (SHC) photonic crystal fiber (PCF) is demonstrated. Such a device is fabricated by splicing a section of SHC PCF with single mode fibers at both cleaved ends. An extremely low temperature sensitivity of ~0.273 pm/°C is obtained between room temperature and 900°C. By drilling vertical micro-channels using a f...
متن کاملOptofluidic Fabry-Pérot Micro-Cavities Comprising Curved Surfaces for Homogeneous Liquid Refractometry - Design, Simulation, and Experimental Performance Assessment
In the scope of miniaturized optical sensors for liquid refractometry, this work details the design, numerical simulation, and experimental characterization of a Fabry-Pérot resonator consisting of two deeply-etched silicon cylindrical mirrors with a micro-tube in between holding the liquid analyte under study. The curved surfaces of the tube and the cylindrical mirrors provide three-dimensiona...
متن کاملFabry-Pérot-based surface plasmon resonance sensors.
A new sensing approach based on the use of an optical Fabry-Pérot (FP) cavity in conjunction with surface plasmon resonance (SPR) is proposed and theoretically investigated. The impact of the SPR on the intensity and phase response of the proposed sensor structure is evaluated using a modified FP model that takes into account the SPR effect. Compared to the conventional optical-phase-detection-...
متن کاملCompressible fiber optic micro-Fabry-Pérot cavity with ultra-high pressure sensitivity.
We propose and demonstrate a pressure sensor based on a micro air bubble at the end facet of a single mode fiber fusion spliced with a silica tube. When immersed into the liquid such as water, the air bubble essentially acts as a Fabry-Pérot interferometer cavity. Such a cavity can be compressed by the environmental pressure and the sensitivity obtained is >1000 nm/kPa, at least one order of ma...
متن کامل