Comparative analysis of the mechanical and thermal properties of polyester hybrid composites reinforced by jute and glass fiber
نویسنده
چکیده
This work describes the study to investigate and compare the mechanical and thermal properties of raw jute and glass fiber reinforced polyester hybrid composites. To improve the mechanical properties, jute fiber was hybridized with glass fiber. Polyester resin, jute and glass fibers were laminated in three weight ratios(77/23/0, 68/25/7 and 56/21/23) respectively to form composites. The tensile, flexural, impact, density, thermal and water absorption tests were carried out using hybrid composite samples. This study shows that the addition of jute fiber and glass fiber in polyester, increase the density, the impact energy, the tensile strength and the flexural strength, but decrease the loss mass in function of temperature and the water absorption. Morphological analysis was carried out to observe fracture behavior and fiber pull-out of the samples using scanning electron microscope.
منابع مشابه
Tensile and Flexural Analysis of a Hybrid Bamboo/Jute Fiber-reinforced Composite with Polyester Matrix as a Sustainable Green Material for Wind Turbine Blades
Recently, there has been a fast growth in research and investigation in the natural fibre composite due to the advantages of these materials, such us low environmental impact, low cost and good mechanical properties compared to synthetic fibre composites. Much effort has gone into increasing the mechanical performance and applications of natural fibes. This paper examines the mechanical propert...
متن کاملImpact Properties of Jute and Jute Hybrid Reinforced Composites
The use of natural fiber reinforced composites has continuously increased during recent years due to their low density, low cost and environmental friendliness. At current study, a preliminary investigation on the impact properties and morphologies of unsaturated polyester reinforced by jute woven fabric from the used coffee bags with different moisture contents were carried out. Additionally, ...
متن کاملMechanical and Impact Properties of Untreated Jute Fabric Reinforced Polyester Laminates Compared with Different E- Glass Fibre Reinforced Laminates
In recent years, the improvement of properties of natural fibre reinforced laminates over the pure polymeric matrix has been thoroughly investigated with the aim of providing a possible replacement of E-glass fibre reinforced composites for some large-volume applications. In the present study, the properties of a jute/polyester laminate are compared with those yielded by two E-glass fibre woven...
متن کاملElectrical and Mechanical Performance of Hybrid and Non-hybrid Composites
This paper investigated the moisture absorption, mechanical behavior and the dielectric performance of hybrid and non-hybrid polymeric composites. Hand lay-up technique was used for processing carbon; glass reinforced polyester resin composites (non-hybrid) and carbon-glass/polyester hybrid composites with various fiber configurations. The maximum resistance of water absorption was obtained for...
متن کاملEvaluation of Mechanical and Tribological Properties of Glass/Carbon Fiber Reinforced Polymer Hybrid Composite
Polymer matrix composites used in different industrial applications due to their enhanced mechanical properties and lightweight. However, these materials are subjected to friction and wear situations in some industrial and automobile applications. Therefore, there is a need to investigate the wear properties of polymer matrix composite materials. This article emphasizes the dry abrasive wear be...
متن کامل