Robust C–C bonded porous networks with chemically designed functionalities for improved CO2 capture from flue gas
نویسندگان
چکیده
Effective carbon dioxide (CO2) capture requires solid, porous sorbents with chemically and thermally stable frameworks. Herein, we report two new carbon-carbon bonded porous networks that were synthesized through metal-free Knoevenagel nitrile-aldol condensation, namely the covalent organic polymer, COP-156 and 157. COP-156, due to high specific surface area (650 m2/g) and easily interchangeable nitrile groups, was modified post-synthetically into free amine- or amidoxime-containing networks. The modified COP-156-amine showed fast and increased CO2 uptake under simulated moist flue gas conditions compared to the starting network and usual industrial CO2 solvents, reaching up to 7.8 wt % uptake at 40 °C.
منابع مشابه
Development of New Potassium Carbonate Sorbent for CO2 Capture under Real Flue Gas Conditions
In this paper, the development of a new potassium carbonateon alumina support sorbent prepared by impregnating K2CO3 with an industrial grade of Al2O3 support was investigated. The CO2 capture capacity was measured using real flue gas with 8% CO2 and 12% H2O in a fixed-bed reactor at a temperature of 65 °C using breakthrough curves. The developed sorbent showed an adsorption capacity of 66.2 mg...
متن کاملشبیهسازی بازیافت آب و انرژی از گازهای اتلافی صنایع توسط تکنولوژی جدید مبدل چگالندۀ غشایی
A Number of Industries release large amounts of water vapor into the atmosphere through their stacks. The flue gas can be a potential source for obtaining the required water for those industries. Separation process of water vapor by means of membrane condenser exchanger was studied. Numerical simulation of the process was conducted by COMSOL software using computational fluid dynamics. Simulati...
متن کاملA computational investigation on the structural features of alkanolamine solvents for CO2 capture process from power plant flue gas
متن کامل
Carbon Dioxide Capture by Modified UVM-7 Adsorbent
In this study, bimodal meso-porous silica (UVM-7) synthesized and fabricated amino silane modified supports were characterized by powder X-ray diffraction (XRD), N2 adsorption/desorption, transmission electron microscope (TEM), elemental analysis and titration. Capacity of CO2 capture on modified bimodal pore structure silica at 70°C was calculated using breakthrough curves; and it was found th...
متن کاملExperimental Studies of CO2 Capturing from the Flue Gases
CO2 emissions from combustion flue gases have turned into a major factor in global warming. Post-combustion carbon capture (PCC) from industrial utility flue gases by reactive absorption can substantially reduce the emissions of the greenhouse gas CO2. To test a new solvent (AIT600) for this purpose, a small pilot plant was used. This paper presents the results of studies ...
متن کامل