A Study of Lubricant Inertia Effects for Squeeze Film Dampers Incorporated into High-Speed Turbomachinery

نویسندگان

  • Sina Hamzehlouia
  • Kamran Behdinan
چکیده

This work proposes a numerical model that incorporates the effect of lubricant inertia on the hydrodynamic pressure distribution, fluid film reaction forces, and the fluid velocity component profiles for finite-length open-ended squeeze film dampers (SFDs). Firstly, the thin film flow equations for the SFD in presence of fluid inertia effects are introduced. Furthermore, a small first-order perturbation by means of the expressions for the fluid film velocity components and the lubricant pressure distribution that are expanded in power series of the squeeze film Reynolds number is applied to the flow equations. Subsequently the developed lubricant flow equations are solved to develop expressions for the velocity component profiles and the hydrodynamic pressure distribution in SFDs. The pressure expression is numerically solved by using Gauss–Seidel method with finite difference discretization. Moreover, the fluid film reaction forces are determined by numerically integrating the hydrodynamic pressure expressions over the journal surface. Additionally, the proposed pressure distribution expression and the numerical SFD forces are incorporated into a simulation model and the simulation results are compared with the existing models in the literature under different operating conditions, including eccentricity ratios and inertia effects (i.e., Reynolds numbers). The simulation results demonstrate the significant influence of both convective and temporal (i.e., unsteady) lubricant inertia terms on the SFD hydrodynamic pressure distribution and the fluid film reaction forces. Furthermore, the proposed SFD model is incorporated into a multi-mass flexible rotordynamic model to evaluate the effect of SFD fluid inertia on the mass unbalance induced steady-state vibrations of the rotor and the nodal transient orbits by implementing finite element method and transient modal integration with predictor–corrector solver. The results of the analysis demonstrate the significant effect of fluid inertia on the resonance frequencies of the rotor and the steady-state vibration amplitudes and the transient orbits at the resonance zone.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Dynamic Analysis of a Rotor Supported on Ball Bearings with Waviness and Centralizing Springs and Squeeze Film Dampers

Squeeze film dampers (SFDs) are often used in machines with high rotational speed to reduce non-periodic behavior by creating external damping. There are some structural parameters which are of great importance in designing these systems, such as oil film thickness and inner race mass of SFD. Moreover, there is a crucial parameter associated with manufacturing process, under the title of wavine...

متن کامل

Nonlinear Analysis of Squeeze Film Damper with Entrained Air in Rotordynamic Systems

Squeeze film dampers are widely used in aircraft engines, land-based gas turbines, and other rotating machines to improve system damping. They often have entrained air within the oil film, which is usually not taken into account in rotordynamics analysis due to lack of good formulations of the effects involved. The effects on the damping force calculation can be significant. This work presents ...

متن کامل

MATHEMATICAL ANALYSIS OF NEWLY DESIGNED TWO POROUS LAYERS SLIDER BEARING WITH A CONVEX PAD UPPER SURFACE CONSIDERING SLIP AND SQUEEZE VELOCITY USING FERROFLUID LUBRICANT

This paper proposes mathematical modeling and analysis of ferrofluid lubricated newly designed slider bearing having convex pad (surface or plate) stator with two porous layers attached to the slider. The problem considers the effect of slip velocity proposed by Sparrow et. al.[1] and modified by Shah et. al.[2] at the film-porous interface. The squeeze velocity V=−which appears when the upper ...

متن کامل

Magnetic fluid based squeeze film between porous elliptical plates

Archibald [1] analyzed the performance of a squeeze film between various geometrical configurations. Later on Wu [2, 3] investigated a squeeze film behavior for mainly, two types of geometries namely, annular and rectangular. Prakash and Viz [4] developed some aspects of the analysis incorporated in Wu [2, 3] and obtained the load carrying capacity ultimately leading to time height relation for...

متن کامل

Study of Nonlinear MHD Tribological Squeeze Film at Generalized Magnetic Reynolds Numbers Using DTM

In the current article, a combination of the differential transform method (DTM) and Padé approximation method are implemented to solve a system of nonlinear differential equations modelling the flow of a Newtonian magnetic lubricant squeeze film with magnetic induction effects incorporated. Solutions for the transformed radial and tangential momentum as well as solutions for the radial and tan...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2017