Stiff and Soft Stewart Platforms for Active Damping and Active Isolation of Vibrations
نویسنده
چکیده
As future astronomic missions will require more and more stringent resolution requirements, the high demand for an environment clean of vibrations and disturbance appears. This also leads to the need for high precision steering devices for fine pointing of sensitive optics with the highest possible accuracy. Several methods exist to reduce vibration levels: the first consists in isolating the sensitive system from the perturbation and the second in damping the structure vibration modes. Therefore, two Stewart platforms have been designed, manufactured and tested. The first is a soft hexapod that provides 6 degree-of-freedom (DOF) active isolation and the second is a stiff hexapod that provides active damping to whatever flexible payload attached/mounted to it. In addition, both hexapods have steering capabilities.
منابع مشابه
A Simple Approach for Determination of Actuator and Sensor Locations in Smart Structures Subjected To the Dynamic Loads
The present work demonstrates the successful application of a simple active vibration control procedure based on structural dynamics. Based on mathematical and structural dynamics’ theories, the appropriate locations of sensor and actuator locations of the smart structure are predicted. Also, the optimum value of actuator force which controls the structural vibrations as quickly as it is possib...
متن کاملThe effect of semi-active controller in Sirri jacket seismic vibration control
The Sirri jacket offshore platform was designed and installed in Persian gulf of Iran in 1975 and has been in service since that time. The importance of offshore structure's stability and the failure of this kind of structure during an earthquake in different active zones revealed that earthquake loading has to be considered. In this paper, Magnetorheological (MR) fluid dampers have been propos...
متن کاملMULTI-OBJECTIVE SEMI-ACTIVE BASE ISOLATION SYSTEM
Semi-active base isolation system has been proposed mainly to mitigate the base drift of isolated structures while in most cases, its application causes the maximum acceleration of superstructure to be increased. In this paper, designing optimal semi-active base isolation system composed of linear base isolation system with low damping and magneto-rheological (MR) damper has been studied for co...
متن کاملOPTIMAL HYBRID BASE ISOLATION AND MR DAMPER
In this paper, optimal design of hybrid low damping base isolation and magnetorheological (MR) damper has been studied. Optimal hybrid base isolation system has been designed to minimize the maximum base drift of low damping base isolation system where for solving the optimization problem, genetic algorithm (GA) has been used. In design procedure the maximum acceleration of the structure has ...
متن کاملCompact and Efficient Active Vibro-acoustic Control of a Smart Plate Structure
An effective wide band active control law through one kind of the Dynamic Vibration Absorber (DVA) is proposed and studied in this paper. With the help of mechanical impedance method, active DVA control law is formulated based on the passive mechanical model. The electrical DVA can generate multi-mode active damping to the structure. The host structure is an aluminum plate and acceleration sign...
متن کامل