Provably Convergent Multifidelity Optimization Algorithm Not Requiring High-Fidelity Derivatives

نویسندگان

  • Andrew March
  • Karen Willcox
چکیده

This paper presents a provably convergent multifidelity optimization algorithm for unconstrained problems that does not require high-fidelity gradients. The method uses a radial basis function interpolation to capture the error between a high-fidelity function and a low-fidelity function. The error interpolation is added to the low-fidelity function to create a surrogate model of the high-fidelity function in the neighborhood of a trust region. When appropriately distributed spatial calibration points are used, the low-fidelity function and radial basis function interpolation generate a fully linear model. This condition is sufficient to prove convergence in a trust region framework. In the case when there are multiple lower-fidelity models, the predictions of all calibrated lower-fidelity models can be combinedwith amaximum likelihood estimator constructed using kriging variance estimates from the radial basis function models. This procedure allows for flexibility in sampling lower-fidelity functions, does not alter the convergence proof of the optimization algorithm, and is shown to be robust to poor low-fidelity information. The algorithm is comparedwith a single-fidelity quasi-Newton algorithmand twofirst-order consistentmultifidelity trust region algorithms. For simple functions the quasi-Newton algorithm uses slightly fewer high-fidelity function evaluations; however, for more complex supersonic airfoil design problems it uses significantly more. In all cases tested, our radial basis function calibration approach uses fewer high-fidelity function evaluations when compared with first-order consistent trust region schemes.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Constrained multifidelity optimization using model calibration

Multifidelity optimization approaches seek to bring higher-fidelity analyses earlier into the design process by using performance estimates from lower-fidelity models to accelerate convergence towards the optimum of a highfidelity design problem. Current multifidelity optimization methods generally fall into two broad categories: provably convergent methods that use either the high-fidelity gra...

متن کامل

Surrogate-Based Optimization Using Multifidelity Models with Variable Parameterization and Corrected Space Mapping

Surrogate-based-optimization methods provide a means to achieve high-fidelity design optimization at reduced computational cost by using a high-fidelitymodel in combinationwith lower-fidelitymodels that are less expensive to evaluate. This paper presents a provably convergent trust-region model-management methodology for variableparameterization design models: that is, models for which the desi...

متن کامل

Multifidelity approaches for optimization under uncertainty

It is important to design robust and reliable systems by accounting for uncertainty and variability in the design process. However, performing optimization in this setting can be computationally expensive, requiring many evaluations of the numerical model to compute statistics of the system performance at every optimization iteration. This paper proposes a multifidelity approach to optimization...

متن کامل

Survey of Multifidelity Methods in Uncertainty Propagation, Inference, and Optimization

In many situations across computational science and engineering, multiple computational models are available that describe a system of interest. These different models have varying evaluation costs and varying fidelities. Typically, a computationally expensive high-fidelity model describes the system with the accuracy required by the current application at hand, while lower-fidelity models are ...

متن کامل

A Multifidelity Gradient-Free Optimization Method and Application to Aerodynamic Design

The use of expensive simulations in engineering design optimization often rules out conventional techniques for design optimization for a variety of reasons, such as lack of smoothness, unavailability of gradient information, presence of multiple local optima, and most importantly, limits on available computing resources and time. Often, the designer also has access to lower-fidelity simulation...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012