Thermal modelization and experiments on the current of superconducting microbridges dependence to light in the 10-90K range
نویسندگان
چکیده
منابع مشابه
Effect of Sintering Conditions on Microstructure and the Superconducting Properties of YBa2Cu3O7 x
YBa2Cu3O7-X tapes fabricated from precursor powder, were used to investigate the effect of sintering conditions on the microstructure. The sintering experiments were carried out in oxygen over the temperature range of 915-950ْC. Scanning electron microscopy was used to examine the sintered products. The result indicated a significant increase in densification and grain growth when the tapes were...
متن کاملInfluence of Fault Current Limiter in Voltage Drop and TRV Considering Wind Farm
Influence of distributed generation systems in the distribution systems can increase the level of short-circuit current. The effectiveness of distributed generation systems is affected by the size, location, type of distributed generation systems technology, and the methods of connecting to distribution systems. Wind turbine system is the examples of distributed generation source. Not only does...
متن کاملAn Optimal Design Approach for Resistive and Inductive Superconducting Fault Current Limiters via MCDM Techniques
The design process of a superconducting current limiter (SFCL) requires simulation and definition of its electrical, magnetic and thermal properties in form of equivalent circuits and mathematical models. However, any change in SFCL parameters: dimension, resistance, and operating temperature can affect the limiting mode, quench time, and restore time. In this paper, following the simulation of...
متن کاملپارامتر نظم ابررسانایی در فلز CeIrIn5
To understand the mechanism of superconductivity in unconventional super onductors is one of the big challenges in the field of superconductivity. Based on the BCS theory, there is a direct relation between the pairing mechanism and the symmetry of the order parameter. Therefore, identification of the structure of the superconducting gap or the order parameter provides key information on the pa...
متن کاملOptimal SQUID based non-destructive test for detecting sub-surface defects with the help of advanced SQUID superconducting sensors and an experimental approach for optimal production method of these sensors from the YBCO superconductor materials
The conventional eddy current method for non-destructive inspection of welding joints has limitations that can examine defects to a certain depth below the surface of the sample and is not suitable for determining deep defects. This limitation can be overcome using the SQUID superconducting sensors. The nonstoichiometric composition of YBCO due to its superconducting temperature and desired cri...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2017