Modelling and analysis of a MEMS approach to dc voltage step-up conversion
نویسنده
چکیده
This paper studies the principle of a novel voltage step-up converter based on a micromachined variable parallel-plate capacitor in combination with an electrostatic actuator. Electrical equivalent circuit and system-level SIMULINK models have been developed. Based on these models, an analysis of design parameters and expected device performance has been performed to serve as a starting point for a prototype implementation. Possible areas of application are self-powered, stand-alone sensing systems, aerospace applications and any kind of electrostatic or piezoelectric MEMS devices in general.
منابع مشابه
An Interleaved Configuration of Modified KY Converter with High Conversion Ratio for Renewable Energy Applications; Design, Analysis and Implementation
In this paper, a new high efficiency, high step-up, non-isolated, interleaved DC-DC converter for renewable energy applications is presented. In the suggested topology, two modified step-up KY converters are interleaved to obtain a high conversion ratio without the use of coupled inductors. In comparison with the conventional interleaved DC-DC converters such as boost, buck-boost, SEPIC, ZETA a...
متن کاملA MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کاملA Coupled Inductor Based High Voltage Gain DC-DC Converter Using Interleaved Voltage Multiplier Cells
In this work, a non-isolated high step up DC-DC converter using coupled inductor and voltage multiplier cell is proposed. The proposed converter conversion ratio is efficiently extended by using a coupled inductor. An interleaved configuration of two diode-capacitor cells is applied to step up the voltage conversion ratio and decrease the voltage stress across the switches. Also, in the suggest...
متن کاملAn Efficient High-Step-Up Soft-Switching Boost Converter for Photovoltaic Application
In this paper an efficient high step-up converter with a coupled- inductor with soft- switching operation is presented. The proposed topology includes a coupled-inductor boost converter for raising the voltage gain. Moreover, a simple auxiliary resonant circuit composed of an auxiliary switch, a clamping diode and a resonant tank (inductor, capacitor), is adopted in this paper. The coupled-indu...
متن کاملHigh Step-Up Interleaved DC/DC Converter Using VM Cell for PV Applications
This work proposes a high step-up interleaved dc/dc topology utilizing a VM (voltage multiplier) cell suitable for PV applications. The VM cells D/C (Diode/Cap.) are cascaded among the phases to approach a high voltage gain. Besides, the voltage converting ratio of the presented structure can be improved by extending the VM cells and it also leads to drop in the normalized voltage stress throug...
متن کامل