Real-time brake torque estimation for internal combustion engines
نویسندگان
چکیده
Presented is a real-time engine brake torque estimation model where the instantaneous measured engine speed serves as the model input. The model is comprised of notch filters executed in the crank-angle domain to extract mean engine speed and the nth frequency component from the instantaneous engine speed signal in real-time. Here n denotes the number of engine cylinders. Moreover, the engine brake torque estimation is separated into two parts: steady-state and transient. It will be shown that the nth harmonic (in units of periods per engine cycle) of engine speed and mean engine speed are sufficient to estimate the engine brake torque. The steady-state portion of the model is developed using orthogonal leastsquares estimation and results in a model with 15 regressors for our particular case. The transient portion is identified using a time domain identification method. Validation of the engine brake torque model is provided using a computational engine model for a 6-cylinder heavy duty diesel engine. Transient engine speed and torque conditions in the presence of sensor noise are evaluated as well as cylinder power imbalance scenarios. r 2007 Elsevier Ltd. All rights reserved.
منابع مشابه
Real time model predictive idle speed control of ultra-lean burn engines: experimental results
Idle speed control of ultra-lean burn engines continues to be a major focus of automotive engineers owing to the benefits offered in terms of fuel economy and emissions reduction. This paper applies a recently proposed linear time varying model predictive approach for the idle speed control of ultra-lean burn internal combustion engines. Unlike conventional gasoline engines, the approach uses f...
متن کاملAn Investigation of Maximum Brake Torque Timing based on Ionization Current Feedback
Sammanfattning For every operating condition of an internal combustion engine there exists an optimal spark timing, called maximum brake torque (MBT), which maximises the output torque and the efficiency of the engine. Traditionally MBT timing is implemented as an open-loop control where the ignition timing is found by using a combination of static lookup tables and sensor information. With a d...
متن کاملDetermination of Optimal ValveTiming for Internal Combustion Engines Using Parameter Estimation Method
متن کامل
Derivation of Specific Heat Rejection Correlation in an SI Engine; Experimental and Numerical Study
The thermal balance analysis is a useful method to determine energy distribution and efficiency of internal combustion (IC) engines. In engines cooling concepts, estimation of heat transfer to brake power ratio, as one of the most significant performance characteristics, is highly demanded. In this paper, investigation of energy balance and derivation of specific heat rejection is carried out e...
متن کاملExperimental Investigation of Thermal Balance and Valve Cover Heat Transfer in a Small Internal Combustion Engine
Heat transfer in internal combustion engines is one of the most significant topics. Heat transfer may take place through thermal conduction and thermal convection in spark ignition engines. In this study, valve cover heat transfer and thermal balance of an air-cooled engine are investigated experimentally. The thermal balance analysis is a useful method to determine energy distribution and effi...
متن کامل