Molten Carbonate Fuel Cell Modelling
نویسندگان
چکیده
Hybrid plants where a fuel cell and a gas turbine are combined have attracted the attention of the power system community. In this paper, a model is provided of a Molten Carbonate Fuel Cell stack and of the thermo-hydraulic equipment in which it is embedded. The model is worked out from basic physical considerations; however, it is also simple enough for simulation and control purposes. Besides, it has been validated against experimental data. Copyright©2005 IFAC.
منابع مشابه
New Mathematical Modelling and Dynamic Simulation of a Molten Carbonate Fuel Cell
In this study, a more accurate model of fuel cell of molten carbonate was also used that was determined input and output control variables and investigated the behavior of the system with respect to those variables. A more complete kinetic is also implemented for increasing the effectiveness of the presented paper. The input variables include fuel flow rate of cell which is methane and cell vol...
متن کاملExergy Analysis of a Molten Carbonate Fuel Cell-Turbo Expander-Steam Turbine Hybrid Cycle
Exergy analysis of an integrated molten carbonate fuel cell-turbo expander-steam turbine hybrid cycle has been presented in this study. The proposed cycle has been used as a sustainable energy approach to provide a micro hybrid power plant with high exergy efficiency. To generate electricity by the mentioned system, an externally reformed molten carbonate fuel cell located upstream of the combi...
متن کاملModeling and Process Analysis of a Biomass Gasifier-Molten Carbonate Fuel Cell-Gas Turbine-Steam Turbine Cycle as a Green Hybrid Power Generator
Fuel cell-based hybrid cycles that include conventional power generators have been created to modify energy performance and output power. In the present paper, integrated biomass gasification (IBG)-molten carbonate fuel cell (MCFC)-gas turbine (GT) and steam turbine (ST) combined power cycle is introduced as an innovative technique in terms of sustainable energy. In addition, biomass gasificati...
متن کاملHigh-temperature Fuel Cells
The molten carbonate fuel cell operates at approximately 650 °C (1200 °F). The high operating temperature is needed to achieve sufficient conductivity of the carbonate electrolyte, yet allow the use of low-cost metal cell components. A benefit associated with this high temperature is that noble metal catalysts are not required for the cell electrochemical oxidation and reduction processes. Molt...
متن کاملMolten Carbonate Fuel Cells
Molten carbonate fuel cells use carbonate salts of alkali metals as electrolyte. Due to the highly corrosive nature of the electrolyte, various countermeasures are being developed. MCFCs are expected for high-efficiency power generation systems using hydrocarbon fuels, such as natural gas and coal gas. This article describes the mechanisms of operation and cell degradation, as well as the featu...
متن کامل