Decentralized Sliding Mode Observer Based Dual Closed-Loop Fault Tolerant Control for Reconfigurable Manipulator against Actuator Failure
نویسندگان
چکیده
This paper considers a decentralized fault tolerant control (DFTC) scheme for reconfigurable manipulators. With the appearance of norm-bounded failure, a dual closed-loop trajectory tracking control algorithm is proposed on the basis of the Lyapunov stability theory. Characterized by the modularization property, the actuator failure is estimated by the proposed decentralized sliding mode observer (DSMO). Moreover, the actuator failure can be treated in view of the local joint information, so its control performance degradation is independent of other normal joints. In addition, the presented DFTC scheme is significantly simplified in terms of the structure of the controller due to its dual closed-loop architecture, and its feasibility is highly reflected in the control of reconfigurable manipulators. Finally, the effectiveness of the proposed DFTC scheme is demonstrated using simulations.
منابع مشابه
Fault tolerant control allocation via continuous integral sliding-modes: A HOSM-Observer approach
In this paper a continuous fault tolerant control allocation is proposed. This approach is based on a uniform High-Order Sliding-Mode Observer where only measurable outputs are used. The fault tolerant control scheme is developed using, for the first time, a continuous integral sliding-mode and a fixed control allocation technique which provides an approximate estimation of matched faults. The ...
متن کاملRobust Controller Design Based on Sliding Mode Observer in The Presence of Uncertainties and Actuator Saturation
This paper studies the design of a robust output feedback controller subject to actuator saturation. For this purpose, a robust high-gain sliding mode observer is used to estimate the state variables. Moreover, the combination of Composite Nonlinear Feedback (CNF) and Integral Sliding Mode (ISM) controllers are used for robust output tracking. This controller consists of two parts, the CNF part...
متن کاملRobust Fault-Tolerant Tracking Control Scheme for Nonlinear Nonaffine-in-control Systems Against Actuator Faults
In this paper a theoretical framework of robust fault-tolerant control (FTC) for a class of nonlinear nonaffine-in-control systems is developed. In the framework, an observer-like auxiliary system is designed via adaptive and sliding mode techniques, which is only required to ensure that the output of the auxiliary system asymptotic tracking plant output. Based on the auxiliary system, a reconf...
متن کاملAn Unknown Input Observer for Fault Detection Based on Sliding Mode Observer in Electrical Steering Assist Systems
Steering assist system controls the force transfer behavior of the steering system and improves the steering probability of the vehicle. Moreover, it is an interface between the diver and vehicle. Fault detection in electrical assisted steering systems is a challenging problem due to frequently use of these systems. This paper addresses the fault detection and reconstruction in automotive elect...
متن کاملIntegral sliding mode fault tolerant control schemes with control allocation
Integral Sliding Mode Fault Tolerant Control Schemes with Control Allocation Mirza Tariq Hamayun The key attribute of a Fault Tolerant Control (FTC) system is to maintain overall system stability and acceptable performance in the face of faults and failures within the system. In this thesis new integral sliding mode (ISM) control allocation schemes for FTC are proposed, which have the potential...
متن کامل