Modelling of Cement Grinding Circuits for Predictive Control
نویسندگان
چکیده
A first principles model of a cement grinding circuit is developed for the purpose of multi-variable model predictive control (MPC). The model is based on a series of mixed flow reactors with an ideal screen to model flow between the two chambers in the ball mill. The separator is modelled by efficiency curves. Breakage of the particles is modelled as a first order process in terms of functions for the specific rate of breakage and the fragment distribution from breakage. These breakage functions are empirically based. A stationary solution for the model is found and dynamic simulations of step changes in the manipulated variables are shown. Copyright c © 2005 IFAC.
منابع مشابه
Computer Simulation of Particle Size Classification in Air Separators
Cement powder size classification efficiency significantly affects quality of final product and extent of energy consumption in clinker grinding circuits. Static and dynamic or high efficiency air separators are being used widely in closed circuit with multi-compartment tube ball mills, High Pressure Grinding Rolls (HPGR) and more recently Vertical Roller Mills (VRM) units in cement plants ...
متن کاملCo-grinding significance for calcium carbonate-calcium phosphate mixed cement. Part I: effect of particle size and mixing on solid phase reactivity.
In part I of this study we aim to evaluate and control the characteristics of the powders constituting the solid phase of a vaterite CaCO(3)-dicalcium phosphate dihydrate cement using a co-grinding process and to determine their impact on cement setting ability. An original methodology involving complementary analytical techniques was implemented to thoroughly investigate the grinding mechanism...
متن کاملMultivariable nonlinear predictive control of cement mills
A new multivariable controller for cement milling circuits is presented, which is based on a nonlinear model of the circuit and on a nonlinear predictive control strategy. Comparisons with previous LQ control strategies show improved performances with respect to an important source of perturbations of the circuit: a change of hardness of the raw material.
متن کاملStage specialization for design and analysis of flotation circuits
This paper presents a new approach for flotation circuit design. Initially, it was proven numerically and analytically that in order to achieve the highest recovery in different circuit configurations, the best equipment must be placed at the beginning stage of the flotation circuits. The size of the entering particles and the types of streams including pulp and froth were considered as the bas...
متن کاملA MEMS Capacitive Microphone Modelling for Integrated Circuits
In this paper, a model for MEMS capacitive microphone is presented for integrated circuits. The microphone has a diaphragm thickness of 1 μm, 0.5 × 0.5 mm2 dimension, and an air gap of 1.0 μm. Using the analytical and simulation results, the important features of MEMS capacitive microphone such as pull-in voltage and sensitivity are obtained 3.8v and 6.916 mV/Pa, respectively while there is no...
متن کامل