Waveform Generator Fundamentals
ثبت نشده
چکیده
Test equipment applications require signal stimuli varying from advanced communication signals to the playback of captured real-world analog signals. Signal source instruments generate the signal stimulus that is applied to a device under test (DUT). Consequently, signal sources comprise an important class of test instruments. This article describes applications of an arbitrary waveform generator as a general purpose function generator and waveform generator.
منابع مشابه
Internal Fault Detection, Location, and Classification in Stator Winding of the Synchronous Generators Based on the Terminal Voltage Waveform
In this paper, a novel method is presented for detection and classification of the faultyphase/region in the stator winding of synchronous generators on the basis of the resulting harmoniccomponents that appear in the terminal voltage waveforms. Analytical results obtained through DecisionTree (DT) show that the internal faults are not only detectable but also they can be classified andthe rela...
متن کاملA sine waveform generator for on-chip testing of the audio chip
A sine waveform signal generator for the on chip testing of mixed-signal circuits for speech processing is present. The idea behind is to attenuate the higher frequencies in a periodic triangular waveform. The hardware implementation is discussed. And the simulation results validate our proposal. This generator can be employed for both the digital BIST and the analog/mixed-signal BIST applicati...
متن کاملUltrasound Driving Application of a Universal Waveform Generator Derived from Displaying Driving System
The design of a universal waveform generator derived from displaying driving applications using floating power and Miller integrator circuit is introduced first. Then, the feasibility of driving ultrasound transducers is verified by the test of the circuit and compared with other specific design of pulse generator for ultrasound driving purpose.
متن کاملFast Fpga Based Low-trigger-jitter Waveform Generator Method for Barrier-bucket Electronics at Fair∗
A new method for low trigger-jitter waveform generation is presented. The targeted application is the time-delayed, trigger synchronous waveform generation. The method can be implemented on a single FPGA, which drives an ADC. The phase-jitter between a trigger signal fed to the FPGA and the generated single sine waveform is σ= 40 ps and 275 ps peak-to-peak. The response time of the wave form ge...
متن کاملA Novel Programmable Waveform Generator for Ultrasound Therapy Machine using FPGA
The current ultrasound therapy machines are implementing continuous waveform, which in fact, is not an optimum technique for therapy treatment process. Apparently, pulse waveform appearing as a more effectively way of signal generation in terms of its power consumption, low cost hardware and short timing used. In order to overcome these drawbacks of conventional therapy machines, we proposed a ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2010