Three-dimensionally ordered macroporous Li3V2(PO4)3/C nanocomposite cathode material for high-capacity and high-rate Li-ion batteries.
نویسندگان
چکیده
A three-dimensionally ordered macroporous (3DOM) Li3V2(PO4)3/C cathode material with small-sized macropores (50-140 nm) is successfully synthesized using a colloidal crystal array. The 3DOM architecture is built up from fully densely sintered Li3V2(PO4)3/C nanocomposite ceramics particles. Such a 3DOM Li3V2(PO4)3/C micrometer sized particle combines the advantages of both Li3V2(PO4)3 nanocrystal and micrometer sized particle. The resultant 3DOM Li3V2(PO4)3/C nanocomposite exhibits a stable and highly reversible discharge capacity up to 151 mA g(-1) at 0.1 C, and an excellent high-rate capability of 132 mA g(-1) at 5 C in the voltage range of 3.0-4.4 V. Compared to the corresponding bulk nanocomposite, the 3DOM Li3V2(PO4)3/C cathode exhibits a significantly improved high-rate performance, which promises new opportunities in the development of high energy and high power lithium-ion batteries.
منابع مشابه
Carbon wrapped hierarchical Li3V2(PO4)3 microspheres for high performance lithium ion batteries
Nanomaterials are extensively studied in electrochemical energy storage and conversion systems because of their structural advantages. However, their volumetric energy density still needs improvement due to the high surface area, especially the carbon based nanocomposites. Constructing hierarchical micro-scaled materials from closely stacked subunits is proposed as an effective way to solve the...
متن کاملRevisiting Li3V2(PO4)3 as an anode – an outstanding negative electrode for high power energy storage devices
Monoclinic Li3V2(PO4)3 (LVP) has long been considered primarily as a cathode material for lithium-ion batteries (LIBs). However, due to its amphoteric nature, LVP can also host additional lithium ions. Nonetheless, its use as an anode material for LIBs has hardly been investigated. In this work, we synthesize a nanostructured Li3V2(PO4)3 material with an ionic liquid-derived carbon coating and ...
متن کاملManipulating Size of Li3V2(PO4)3 with Reduced Graphene Oxide: towards High-Performance Composite Cathode for Lithium Ion Batteries
Lithium vanadium phosphate (Li3V2(PO4)3, LVP)/reduced graphene oxide (rGO) composite is prepared with a rheological method followed by heat treatment. The size and interface of LVP particles, two important merits for a cathode material, can be effectively tuned by the rGO in the composite, which plays as surfactant to assist sol-gelation and simultaneously as conductive carbon coating. As a con...
متن کاملVoltage increase of aqueous lithium-ion batteries by Li-ion conducting Li1.5Al0.5Ge1.5(PO4)3 glass-ceramic
In this research, a lithium ion conducting lithium aluminum germanium phosphate (LAGP) glass-ceramic with a formula of Li1.5Al0.5Ge1.5(PO4)3 was synthesized by melt-quenching method and subsequent crystallization at 850 °C for 8 h. The prepared glass-ceramic was characterized using X-ray diffraction analysis (XRD) and field emission scanning electron microscopy (FESEM). The XRD patterns exhib...
متن کاملIn Situ Raman Study of Phase Stability of α‐Li3V2(PO4)3 upon Thermal and Laser Heating
Monoclinic α-Li3V2(PO4)3 has a complex 3-D metal phosphate framework that provides mobility for all three lithium ions, giving it the highest gravimetric capacity (197 mAh/g) of all the transition-metal phosphates. Along with its high gravimetric capacity, its thermal and electrochemical stability make it of great interest as a cathode material for lithium-ion energy storage devices. Raman spec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nanoscale
دوره 6 6 شماره
صفحات -
تاریخ انتشار 2014