Computation of Turbulent Separated Nozzle Flow by a Lag Model
نویسندگان
چکیده
TECHNICAL NOTES are short manuscripts describing new developments or important results of a preliminary nature. These Notes cannot exceed 6 manuscript pages and 3 figures; a page of text may be substituted for a figure and vice versa. After informal review by the editors, they may be published within a few months of the date of receipt. Style requirements are the same as for regular contributions (see inside back cover).
منابع مشابه
Computation of Shock Induced Separated Flow with a Lagged k-ω Turbulence Model
The lag model proposed by Olsen and Coakley is incorporated into the baseline two-equation k-ω turbulence model to simulate the transonic and supersonic turbulent separated flow. The performances of the lagged k-ω turbulence model is assessed by computing two transonic airfoil flow cases, the RAE2822 Case 10 and the 18% thick double circular arc airfoil, and a separated nozzle flow. The computa...
متن کاملAssessment of Turbulent Models in Computation of Strongly Curved Open Channel Flows
Several rigorous turbulent models have been developed in the past years and it can be seen that more research is needed to reach a better understanding of their generality and precision by verifying their applications for distinct hydraulic phenomena; under certain assumptions. This survey evaluates the performance of Standard k-ε, Realizable k-ε, RNG k-ε, k-ω and RSM models in predicting flow ...
متن کاملNumerical simulation of turbulent compressible flows in a C-D nozzle with different divergence angles
Compressible gas flow inside a convergent-divergent nozzle and its exhaust plume atdifferent nozzle pressure ratios (NPR) have been numerically studied with severalturbulence models. The numerical results reveal that, the SST k–ω model give the bestresults compared with other models in time and accuracy. The effect of changes in value ofdivergence half-angle (ε ) on the nozzle performance, thru...
متن کاملA Sliding Mesh Technique and Compressibility Correction Effects of Two-equation Turbulence Models for a Pintle-Perturbed Flow Analysis
Numerical simulations have been performed for assessment of compressibility correction of two-equation turbulence models suitable for large scale separation flows perturbed by pintle strokes. In order to take into account pintle movement, a sliding mesh method was applied. The chamber pressure, mass flow rate, and thrust have been analyzed, and the response lag and sensitivity at the chamber an...
متن کامل3D Numerical Simulation of the Separated Turbulent Shallow Flow around a Single Side Obstacle
In this paper, the performance of Reynolds Averaged Navier Stokes (RANS) simulations was evaluated to predict the flow structure developed by the presence of a sidewall obstruction in a uniform open-channel shallow flow. The study of these flow structures is important because they present in several real world configurations, such as groynes in rivers, where the erosion processes, mass transpor...
متن کامل