Phase transitions and microstructure of emulsion systems prepared with acylglycerols/zinc stearate emulsifier.

نویسندگان

  • Adam Macierzanka
  • Halina Szelag
  • Thomas Moschakis
  • Brent S Murray
چکیده

The emulsification processes, during which acylglycerols/zinc stearate emulsifier, water, and oil phase formed ternary systems, such as water-in-oil (W/O) emulsions, oil-in-water (O/W) dispersions, and unstable oil-water mixtures, were investigated in order to characterize the progressive transformations of the dispersed systems. The type, structure, and phase transitions of the systems were found to be determined by temperature and water phase content. Crystallization of the emulsifier caused the destabilization and subsequent phase inversion of the emulsions studied, at a temperature of 60-61 degrees C. The observed destabilization was temporary and led, at lower temperature, to W/O emulsions, "O/W + O" systems, or O/W dispersions, depending on the water content. Simultaneous emulsification and cooling of 20-50 wt % water systems resulted in the formation of stable W/O emulsions that contained a number of large water droplets with dispersed oil globules inside them ("W/O + O/W/O"). In water-rich systems (60-80 wt % of water), crystallization of the emulsifier was found to influence the formation of crystalline vesicle structures that coexisted, in the external water phase, with globules of crystallized oil phase. Results of calorimetric, rheological, and light scattering experiments, for the O/W dispersions obtained, indicate the possible transition of a monostearoylglycerol-based alpha-crystalline gel phase to a coagel state, in these multicomponent systems.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effective Factors on the Stability of Oil-in-Water Emulsion Based Beverage: A Review

Beverage emulsions are systems that are composed of two liquids including oil and water which are prepared by homogenizing oil phase in an acidic aqueous phase. They must be stable in both concentrated and diluted form for a period of 6-12 months upon standing at room temperature. Two immiscible phases contained systems are thermodynamically unsta-ble. In other words, they are vulnerable to bre...

متن کامل

Studies of the microstructure of polymer-modified bitumen emulsions using confocal laser scanning microscopy.

Polymer-modified bitumen emulsions present a safer and more environmentally friendly binder for enhancing the properties of roads. Cationic bitumen emulsion binders containing polymer latex were investigated using confocal laser scanning microscopy. The latex was incorporated into the bitumen emulsion by using four different addition methods and all emulsions were processed with a conventional ...

متن کامل

Effect of Dispersed Phase Volume Fraction on Physical Stability of Oil-in-Water Emulsion in The Presence of Gum Tragacanth

Background: The dispersed phase volume fraction plays key role in oil-in-water emulsion stability by different mechanisms like partial flocculation, depletion flocculation and bridging flocculation. Since the mentioned mechanism is affected by emulsifier concentration presented in system, the major aim of this study was to investigate the effect of dispersed phase volume fraction on physical st...

متن کامل

Microencapsulation of Butyl Stearate as Phase Change Material by Melamine Formaldehyde Shell for Thermal Energy Storage

Butyl stearate as a phase change material was microencapsulated within melamine-formaldehyde resin using emulsion polymerization. Morphology and thermal specification of produced microcapsules were studied by Fourier transform infrared spectroscopy, FT-IR, scanning electron microscopy, SEM, and Differential scanning calorimetry analysis, DSC. FT-IR spectra validated the existence of the butyl s...

متن کامل

Preparation of Uniform-sized Agarose Beads for Affinity Chromatography Matrix

Uniform-sized agarose beads were prepared by emulsification technique in this study. Agarose (4% w/v) was dissolved in boiling water containing 0.9% sodium chloride and used as water phase. A mixture of liquid paraffin containing 3 wt% of tween 80 emulsifier was heated to 70-80 o C and used as oil phase. Then the heated oil phase was poured into the water phase and the mixture was stirred with ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Langmuir : the ACS journal of surfaces and colloids

دوره 22 6  شماره 

صفحات  -

تاریخ انتشار 2006