Zinc Oxide- Peroxidase Biosensor: Fabrication and Characterization

نویسنده

  • H G. WANKHADE
چکیده

Zinc oxide nanocomposite was prepared by sol gel method. Synthesized nanoparticle was characterized by X-ray diffraction and FT-IR spectroscopy. According to XRD analysis the crystallite size was found to be 30nm (approx) for ZnO. The formation of ZnO is confirmed by FT-IR. ZnO is used for the preparation of HRP/ ZnO/PVA/Au electrode. ZnO nanocomposite is mixed with PVA Solution and a thin layer is formed the gold surface, then HRP is immobilized on that by physisorption. ZnO/PVA/Au electrode is characterized by the SEM, Cyclic voltammetry and impedance analysis. All these techniques confirmed the formation of HRP/ ZnO/PVA/Au electrode. Cyclic voltammetry shows the defined redox peak.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Fabrication of Resistive E. coli Biosensor Based on ZnO Nanorods and Nanoparticles

In this paper, a biosensor has been fabricated using ZnO nanorods and nanoparticles to detect different concentrations of the E. coli bacteria. The innovation of this paper lies in design and fabrication of the resistive type E Coli bacteria sensor. To make this biosensors, printed circuit board based electrodes are designed and made in an interdigitated shape. Both hydrothermal and drop cast m...

متن کامل

Fabrication and Optical Characterization of Zinc Oxide Nanoparticles Prepared via a Simple Sol-gel Method

In this research zinc oxide (ZnO) nano-crystalline powders were prepared by sol-gel method using zinc acetate. The ZnO nanoparticles were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), ultraviolet-visible (UV-Vis), Fourier transform infra-red (FT-IR) and energy dispersive X-ray (EDX) spectroscopy. The structure of nanoparticles was studied using XRD pattern. The c...

متن کامل

Synthesis of zinc oxide nanorods on platinum wire & fabrication of triglyceride biosensor

In the present study platinum (Pt) wire has been used as a substrate for the synthesis of zinc oxide nanorods. Aqueous Chemical Growth method has been used for the successful synthesis of ZnO nanorods on the platinum wire. The synthesis has been confirmed by various analytical techniques. The characterization has also been done by UV-Vis Spectroscopy, X-Ray Diffraction (XRD), Field Effect Scann...

متن کامل

Facile Magnesium Doped Zinc Oxide ‎Nanoparticle Fabrication and ‎Characterization for Biological Benefits

   Zinc oxide (ZnO) is the most common and widely utilized nanomaterial for biological applications due to their unique characteristics, such as biocompatibility, biosafety and antimicrobial along with thermal stability and mechanical strength. Magnesium (Cu) is considered as a significant dopant for ZnO due to their almost similar ionic radii and their role in biological activitie...

متن کامل

Fabrication of a hydrogen peroxide biosensor based on a self-assemble composite oxide film.

A titania film with horseradish peroxidase (HRP) was immobilized on indium tin oxide (ITO) electrodes to act as a biosensor of hydrogen peroxide via the self-assembling and sol-gel route. The film was characterized by the atomic functional microscopy, electrochemical and UV-vis spectroscopy methods. The resulting biosensor exhibited fast amperometric response and good stability to hydrogen pero...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015