Numerical Analysis and Experimental Validation of Detector Pressure Housing Subject to HPHT
نویسنده
چکیده
Reservoirs with high pressures and temperatures (HPHT) that were considered to be atypical in the past are now frequent targets for exploration. For downhole oilfield drilling tools and components, the temperature and pressure affect the mechanical strength. To address this issue, a finite element analysis (FEA) for 206.84 MPa (30 ksi) pressure and 165°C has been performed on the pressure housing of the measurement-while-drilling/logging-whiledrilling (MWD/LWD) density tool. The density tool is a MWD/LWD sensor that measures the density of the formation. One of the components of the density tool is the pressure housing that is positioned in the tool. The FEA results are compared with the experimental test performed on the pressure housing of the density tool. Past results show a close match between the numerical results and the experimental test. This FEA model can be used for extreme HPHT and ultra HPHT analyses, and/or optimal design changes. Keywords—FEA, HPHT, M/LWD, Oil & Gas
منابع مشابه
Laminar Flow Analysis in the Channel Bends
In this paper the laminar flow in the rectangular channel bends is simulated using numerical techniques. The turning angle of the channel bend and the area ratio of the channel cross-section are two important parameters to be examined. For flow simulation, the body fitted 3-D continuity and momentum equations are used and a body fitted general purpose code is developed. The existing results of ...
متن کاملLaminar Flow Analysis in the Channel Bends
In this paper the laminar flow in the rectangular channel bends is simulated using numerical techniques. The turning angle of the channel bend and the area ratio of the channel cross-section are two important parameters to be examined. For flow simulation, the body fitted 3-D continuity and momentum equations are used and a body fitted general purpose code is developed. The existing results of ...
متن کاملFinite Difference Numerical Evaluation of Liquefaction with Effective Stress Method and Numerical Estimation of Liquefaction in Bandar Abbas’s Mosque Project (Case Study)
Introduction Estimation of Liquefaction is one of the main objectives in geotechnical engineering. For this purpose, several numerical and experimental methods have been proposed. An important stage to predict the liquefaction is the prediction of excess pore water pressure at a given point. In general, there are two important methods for soil dynamics analyses, fully coupled effective stress ...
متن کاملCFD Modeling of TiO2 Nano-Agglomerates Hydrodynamics in a Conical Fluidized Bed Unit with Experimental Validation
In the computational fluid dynamics (CFD) modeling of gas-solids two phase flow, the effect of boundary conditions play an important role in predicting the hydrodynamic characteristics of fluidized beds. In this work, the hydrodynamics of conical fluidized bed containing dried TiO2 nano-agglomerates were studied both experimentally and computationally. The pressure drop ...
متن کاملNumerical Analysis of Grease Film Characteristics in Tapered Roller Bearing Subject to Shaft Deflection
The shaft deflection is one of critical factors that deteriorate the grease lubrication state inside the tapered roller bearings (TRBs). So, in this paper, on the premise of the TRB subjected to the combined loads and the shaft is deflected, the grease lubrication model at the TRB contacts was constructed, in which the interaction loads, linear and angular displacements of the bearing parts wer...
متن کامل