A Thermodynamic Investigation of the Redox Properties of Ceria-Titania Mixed Oxides

نویسندگان

  • Gong Zhou
  • Jonathan Hanson
  • Raymond J. Gorte
چکیده

Ceria-titania solutions with compositions of Ce0.9Ti0.1O2 and Ce0.8Ti0.2O2 were prepared by the citric-acid (Pechini) method and characterized using x-ray diffraction (XRD) for structure, coulometric titration for redox thermodynamics, and water-gas-shift (WGS) reaction rates. Following calcination at 973 K, XRD suggests that the mixed oxides exist as single-phase, fluorite structures, although there was no significant change in the lattice parameter compared to pure ceria. The mixed oxides are shown to be significantly more reducible than bulk ceria, with enthalpies for reoxidation being approximately -500 kJ/mol O2, compared to -760 kJ/mol O2 for bulk ceria. However, WGS rates over 1-wt% Pd supported on ceria, Ce0.8Ti0.2O2, and Ce0.8Zr0.2O2 were nearly the same. For calcination at 1323 K, the mixed oxides separated into ceria and titania phases, as indicated by both the XRD and thermodynamic results.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Statistical thermodynamics of non-stoichiometric ceria and ceria zirconia solid solutions.

The thermodynamic redox properties of ceria and ceria zirconia solid solutions are analysed with a new methodology for modelling such systems based on the statistical mechanics of lattice configurations. Experimental thermogravimetric equilibrium data obtained for small non-stoichiometry measurements are combined with literature data to cover a large range of non-stoichiometry (CeO2-δ, δ = 0.00...

متن کامل

Highly stable, mesoporous mixed lanthanum–cerium oxides with tailored structure and reducibility

Pure and mixed lanthanum and cerium oxides were synthesized via a reverse microemulsion-templated route. This approach yields highly homogeneous and phase-stable mixed oxides with high surface areas across the entire range of La:Ce ratios from pure lanthana to pure ceria. Surprisingly, all mixed oxides show the fluorite crystal structure of ceria, even for 10 lanthanum contents as high as 90%. ...

متن کامل

Sustainable selective oxidations using ceria-based materials

This Perspective covers sustainable oxidation processes using doped cerias, ceria-supported catalysts and ceria-based mixed oxides. Firstly, we consider the general properties of ceria-based catalysts. We outline the advantages of the ceria redox cycle, and explain the dynamic behaviour of these catalysts in the presence of metal additives and dopants. We then review three types of catalytic ox...

متن کامل

Anatase TiO2 and mixed M-Anatase TiO2 (M = CeO2 or ZrO2) nano powder: Synthesis and characterization

Pure Anatase Titania (TiO2), mixed 1.0 wt.% Cerium-Anatase Titania (1.0 wt.%CeO2-TiO2), and mixed 1.0 wt.% Zirconia-Anatase Titania (1.0 wt.%ZrO2-TiO2) nano powders were synthesized by co-precipitation method and characterized using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) surface area analysis, UV-Vis diffuse reflectance spect...

متن کامل

Near-ambient XPS characterization of interfacial copper species in ceria-supported copper catalysts.

Catalysts based on combinations of copper and cerium oxides are interesting alternatives to noble metal ones for processes involved in the production/purification of hydrogen produced from hydrocarbons or biomass like the water-gas shift or the preferential oxidation of CO reactions. Active sites for such processes have been proposed to correspond to reduced species formed at the interface betw...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015