One-Step to Prepare Self-Organized Nanoporous NiO/TiO2 Layers and its Use in Non-Enzymatic Glucose Sensing
نویسندگان
چکیده
A highly ordered nanoporous NiTi oxide layers were fabricated on Ti alloys with high Ni contents (50.6 at.%) by a combination of self-organizing anodization at 0°C and subsequent selective etching in H2O2. The key for successful formation of such layers is to sufficiently suppress the dissolve of NiO by applying lower temperature during anodization. The resulting nanoporous structure is connected and well-adhered, which exhibits a much higher electrochemical cycling stability in 0.1 M NaOH. Without further surface modification or the use of polymer binders, the layers can be behave as a low-cost, stable and sensitive platform in non-enzymatic glucose sensing.
منابع مشابه
W-doped nanoporous TiO2 for high performances sensing material toward acetone gas
W-doped TiO2 with nanoporous structure was synthesized by a one-step low temperature hydrothermal method using TiOSO4 and (NH4)6H2W12O40•xH2O as titanium and tungsten sources. Structure, morphology, specific surface area and chemical state of samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). W-doped nanoporo...
متن کاملFabrication and Optimization of a Nanoporous Platinum Electrode and a Non-enzymatic Glucose Micro-sensor on Silicon
In this paper, optimal conditions for fabrication of nanoporous platinum (Pt) were investigated in order to use it as a sensitive sensing electrode for silicon CMOS integrable non-enzymatic glucose micro-sensor applications. Applied charges, voltages, and temperatures were varied during the electroplating of Pt into the formed nonionic surfactant C16EO8 nano-scaled molds in order to fabricate n...
متن کاملThrough-Hole, Self-Ordered Nanoporous Oxide Layers on Titanium, Niobium and Titanium–Niobium Alloys in Aqueous and Organic Nitrate Electrolytes
In the past decades, a variety of self-aligned functional oxides have successfully been grown on a wide range of metals using electrochemical, self-organizing anodization. The earliest reports on highly ordered oxide structures included porous aluminum oxide layers grown by optimized anodization of Al in oxalic acid. These nanoporous oxides found a considerable number of direct applications, su...
متن کاملApplication of Hydrothermal and Non-Hydrothermal TiO2 Nanoporous Materials as New Adsorbents for Removal of Heavy Metal Ions from Aqueous System
Hydrothermal and non-hydrothermal spherical TiO2 nanoporous with crystalline framework were prepared by sol-gel method. The Crystalline structures, morphologies and surface texturing of materials were determined by X-ray diffraction (XRD), scanning electron microscopy (SEM) and N2 adsorption-desorption isotherms. The Hydrothermal spherical TiO2 nanoporous was found to have a narrow and strong p...
متن کاملIntroducing Satellite Remote Sensing Systems and its Application in Archaeology Case Study: Behshahr Plain- Mazandaran
Human groups have considered the Behshahr plain of Mazandaran in the past Due to its particular geographical shape, location between the Caspian Sea and mountains, and the existence of some rivers in the region. However, our knowledge of this area is limited to several published surveys and archaeological investigation of its ancient sites. No detailed research has conducted on the formation of...
متن کامل