Structure and composition of silicon nitride and silicon carbon nitride coatings for joint replacements
نویسندگان
چکیده
SiNx and SiCxNy coatings were fabricated with high power impulse magnetron sputtering (HiPIMS). The coatings microstructure, growth pattern, surface morphology, composition, and bonding structure were investigated by AFM, SEM, GIXRD, TEM, EDS as well as XPS, and related to the deposition parameters target powers and substrate temperature. Crosssections of SiCxNy coatings showed either dense and laminar, or columnar structures. These coatings varied in roughness (Ra between 0.2 and 3.8 nm) and contained up to 35 at.% C. All
منابع مشابه
Mechanical and tribological behavior of silicon nitride and silicon carbon nitride coatings for total joint replacements.
Total joint replacements currently have relatively high success rates at 10-15 years; however, increasing ageing and an active population places higher demands on the longevity of the implants. A wear resistant configuration with wear particles that resorb in vivo can potentially increase the lifetime of an implant. In this study, silicon nitride (SixNy) and silicon carbon nitride (SixCyNz) coa...
متن کاملInfluence of Substrate Heating and Nitrogen Flow on the Composition, Morphological and Mechanical Properties of SiNx Coatings Aimed for Joint Replacements
Silicon nitride (SiNx) coatings are promising for joint replacement applications due to their high wear resistance and biocompatibility. For such coatings, a higher nitrogen content, obtained through an increased nitrogen gas supply, has been found to be beneficial in terms of a decreased dissolution rate of the coatings. The substrate temperature has also been found to affect the composition a...
متن کاملDissolution behaviour of silicon nitride coatings for joint replacements.
In this study, the dissolution rate of SiNx coatings was investigated as a function of coating composition, in comparison to a cobalt chromium molybdenum alloy (CoCrMo) reference. SiNx coatings with N/Si ratios of 0.3, 0.8 and 1.1 were investigated. Electrochemical measurements were complemented with solution (inductively coupled plasma techniques) and surface analysis (vertical scanning interf...
متن کاملDeposition and characterization of silicon carbon nitride films prepared by RF-PECVD with capacitive coupling
The goals of this work were to synthesize stoichiometric silicon carbon nitride (Si1.5C1.5N4) films using the RF-PECVD method and to characterize the deposited material. Gas mixtures, as opposed to an organic monomer, were chosen for reactants. Gas mixtures allow for varying the concentration of the elements needed for silicon carbon nitride synthesis and thereby optimizing the composition of t...
متن کاملFour-wire orthogonal structure for accurate measurement of fluid velocity and wind flow direction using silicon micro-machining on silicon nitride membranes
Microelectromechanical thermal sensors are one of the most accurate and important tools for measuring the direction and velocity of an acoustic wave and winds. Detection of wind direction and speed in different ranges has different applications such as meteorology, wind power plants, gas flow measurement in smart building and gas consumption of power plants. In this paper, a four wires sensor i...
متن کامل