Nonlinear Model Predictive Control for Induction Motor Drive
نویسنده
چکیده
One of the most important development in control area for induction motor has been field oriented control (FOC) established firstly by (Blaschke, 1972). However, the performance of this technique is affected by the motor parameter variations and unknown external disturbances. To improve the dynamic response and reduce the complexity of FOC methods, an extension amount of work has been done to find new methods, such as direct torque control (DTC), sliding mode and nonlinear control (Barut et al., 2005; Chen & Dunnigan, 2003; Chiasson, 1996; Marino et al. 1993).
منابع مشابه
Robust Backstepping Control of Induction Motor Drives Using Artificial Neural Networks and Sliding Mode Flux Observers
In this paper, using the three-phase induction motor fifth order model in a stationary twoaxis reference frame with stator current and rotor flux as state variables, a conventional backsteppingcontroller is first designed for speed and rotor flux control of an induction motor drive. Then in orderto make the control system stable and robust against all electromechanical parameter uncertainties a...
متن کاملImproved Optimization Process for Nonlinear Model Predictive Control of PMSM
Model-based predictive control (MPC) is one of the most efficient techniques that is widely used in industrial applications. In such controllers, increasing the prediction horizon results in better selection of the optimal control signal sequence. On the other hand, increasing the prediction horizon increase the computational time of the optimization process which make it impossible to be imple...
متن کاملModel Reference Neural Predictive Controller for Induction Motor Drive
In this paper an accurate nonlinear model of induction motor using an artificial neural network (ANN) is given. This modeling technique is done by using the data from the system inputs/outputs information without requiring the knowledge about machine parameters. The ANN training is carried out off-line using the Levenberg-Marquardt algorithm. Then, the proposed neural network model is used as p...
متن کاملSensorless Model Predictive Force Control with a Novel Weight Coefficients for 3-Phase 4-Switch Inverter Fed Linear Induction Motor Drives
The sensorless model predictive force control (SMPFC) is a strong method for controlling the drives of three-phase 4(6)-switch inverter linear induction motors. This kind of inverter can be employed for fault tolerant control in order to solve the problem of open/short circuit in 6-switch inverters (B6). This paper proposed a method for the SMPFC of a linear induction motor (LIM) with a 4-switc...
متن کاملIdentification and Adaptive Position and Speed Control of Permanent Magnet DC Motor with Dead Zone Characteristics Based on Support Vector Machines
In this paper a new type of neural networks known as Least Squares Support Vector Machines which gained a huge fame during the recent years for identification of nonlinear systems has been used to identify DC motor with nonlinear dead zone characteristics. The identified system after linearization in each time span, in an online manner provide the model data for Model Predictive Controller of p...
متن کاملA Novel MRAS Based Estimator for Speed-Sensorless Induction Motor Drive
In this paper, a novel stator current based Model Reference Adaptive System (MRAS) estimator for speed estimation in the speed-sensorless vector controlled induction motor drives is presented. In the proposed MRAS estimator, measured stator current of the induction motor is considered as a reference model. The estimated stator current is produced in an adjustable model to compare with the measu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
دوره شماره
صفحات -
تاریخ انتشار 2012